Rpi power hat
About the Rpi power hat
Rpi power hat is an open source PCB design by KPI-Rover, published on GitHub. It is a 2-layer board measuring 65 × 56.5 mm, with 38 components from 26 distinct parts.
Other key parts include the AP64500 and DMMT5401. By type, the board carries 12 resistors, 8 capacitors, 6 connectors, 6 diodes, 2 ICs and 2 transistors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Power hat for RPI
Main components on the Rpi power hat
Rpi power hat bill of materials (BOM)
38 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP64500 | AP64500SP-13 | U1 |
| 1 | DMMT5401 | SOT-23-6 | U2 |
| 2 | HSBA100P04_C2987717 | DFN-8_L5.7-W5.1-P1.27-LS6.1-BL-1 | Q1, Q2 |
| 2 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | CONN-TH_2P-P5.08 | J1, J2 |
| 2 | CONN_01X04_MALE Conn_01x04_Male | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J3, J5 |
| 1 | CONN_01X03_MALE Conn_01x03_Male | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J4 |
| 1 | C50982 Conn_02x20_Odd_Even | PinSocket_2x20_P2.54mm_Vertical | P1 |
| 1 | JTJ-USB-AF-08 | USB-A-TH__USB-AF-90 | USB1 |
| 1 | SMF5V0A | D_SMF | D1 |
| 1 | C5875740 GREEN | LED_0805_2012Metric | D2 |
| 4 | C965817 BLUE | LED_0805_2012Metric | D3, D4, D5, D6 |
| 1 | 3.3UH 3.3uH | IND-SMD_L11.6-W10.1 | L1 |
| 1 | 10UF 10uF | C_1206_3216Metric | C1 |
| 1 | 2.7NF 2.7nF | C_0805_2012Metric | C2 |
| 1 | 100NF 100nF | C_0805_2012Metric | C3 |
| 1 | 39PF 39pF | C_0805_2012Metric | C4 |
| 1 | 47PF 47pF | C_0805_2012Metric | C5 |
| 3 | 22 uF | C_1206_3216Metric | C6, C7, C8 |
| 2 | 47K 47k | R_0805_2012Metric | R1, R7 |
| 1 | 200K 200k | R_0805_2012Metric | R2 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 16K 16k | R_0805_2012Metric | R3 |
| 1 | 120K 120k | R_0805_2012Metric | R4 |
| 1 | 22.1K 22.1k | R_0805_2012Metric | R5 |
| 1 | 10K 10k | R_0805_2012Metric | R6 |
| 1 | 150OHM 330 | R_0805_2012Metric | R8 |
| 4 | 330 | R_0805_2012Metric | R11, R12, R13, R14 |
Rpi power hat design files
The KiCad project lives in the KPI-Rover/rpi-power-hat repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/dcdchat.kicad_pcb
- Schematickicad/dcdchat.kicad_sch
- BOMfabrication/BOM_v1.1.csv
Rpi power hat: common questions
How big is the Rpi power hat?
The Rpi power hat measures 65 × 56.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rpi power hat?
38 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rpi power hat design files?
From the KPI-Rover/rpi-power-hat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rpi power hat design in my own project?
The repository has no license, so all rights stay with KPI-Rover. Use it as a reference, and ask the author before reusing the design.
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979