LT Eval board
About the LT Eval board
LT Eval board is an open source PCB design by kprasadvnsi, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 100 × 100 mm, with 91 components from 26 distinct parts.
Other key parts include the LicheeTang, ADV7123 and CS4344. By type, the board carries 63 resistors, 13 capacitors, 6 connectors, 4 diodes, 3 ICs and 1 inductor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Evaluation board for Lichee Tang
Join our Telegram group for more information and discussions.
Main components on the LT Eval board
LT Eval board bill of materials (BOM)
91 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LicheeTang | Lichee_Tang | U1 |
| 1 | ADV7123 | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | CS4344 | TSSOP-10_3x3mm_P0.5mm | U3 |
| 2 | Conn_01x40_Male | PinHeader_2x20_P2.54mm_Vertical | J1, J2 |
| 1 | HDMI_A | HDMI_A_Female_2000-1-2-41-00-BK | J4 |
| 1 | PJ-307 | PJ-307 | J5 |
| 2 | Mini-DIN-6 | Mini_din6 | J6, J7 |
| 1 | VAL** | mouse-bite-3mm-slot | mouse-bite-3mm-slot |
| 4 | BAT54S | SOT-23 | D1, D2, D3, D4 |
| 1 | 10uH | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 4 | 0.1uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C10 |
| 3 | 3.3uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C11, C13 |
| 1 | 10uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5 |
| 2 | 10nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6, C8 |
| 1 | 1uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7 |
| 2 | 4.7uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C9, C12 |
| 22 | 510 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R13, R14 +14 |
| 18 | 255 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R8, R9, R10, R11, R12, R19, R20 +10 |
| 1 | 4.7K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R25 |
| 1 | 560 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R32 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 75 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R39, R40, R41, R42, R43 |
| 8 | 270 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R44, R45, R46, R47, R48, R49, R50, R51 |
| 1 | 1K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R52 |
| 3 | 470 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R53, R58, R59 |
| 2 | 2K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R54, R55 |
| 2 | 10K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R56, R57 |
LT Eval board design files
The KiCad project lives in the kprasadvnsi/LT_Eval_board repository on GitHub; these links point at the commit this page was built from.
- LayoutLT_Eval_board.kicad_pcb
LT Eval board: common questions
How big is the LT Eval board?
The LT Eval board measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LT Eval board?
91 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the LT Eval board design files?
From the kprasadvnsi/LT_Eval_board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the LT Eval board design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which kprasadvnsi chose for the repository.
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979