13 open source boards using the CS4344

Real designs built with the CS4344, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the CS4344

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the CS4344 connects to, and the resistors, capacitors and other passives placed on it.

  • The VQ_5 pin has a capacitor to GND on 11 of 11 designs, most often 100 nF (then 10 µF).
  • The FILT+_6 pin has a capacitor to GND on 10 of 11 designs, most often 10 µF.
  • The AOUTL_7 pin has a series capacitor on 10 of 10 designs, most often 3.3 µF.
  • The VA_9 pin has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 1 µF).
VQ_5pin 5Connected to: Signal 91%
  • Capacitor to GND on 100% · 100 nF (10), 10 µF (8), 3.3 µF (2)
FILT+_6pin 6Connected to: Signal 100%
  • Capacitor to GND on 91% · 10 µF (10)
AOUTL_7pin 7Connected to: Signal 100%
  • Series capacitor on 100% · 3.3 µF (10)
GND_8pin 8Connected to: GND 100%
VA_9pin 9Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (10), 1 µF (8), 4.7 µF (1)
AOUTR_10pin 10Connected to: Signal 100%
  • Series capacitor on 100% · 3.3 µF (10)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sd2snes by mrehkopf, Sd2snes by magnotrans, Sd2snes by dfederspiel and Magna by Jaxc.

The CS4344 in open source designs

The gallery holds 13 open source boards using the CS4344 from 11 GitHub repositories; a typical one measures about 101.5 × 83 mm and carries around 147 components.

50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Sd2snes by mrehkopf.

Microcontrollers on boards using the CS4344

What boards using the CS4344 are built for

CS4344: common questions

Where can I find a CS4344 reference design?

Each of the 13 boards on this page is a real design using the CS4344. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the CS4344 VQ_5 pin connected?

The VQ_5 pin has a capacitor to GND on 11 of 11 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 11 open source designs using the CS4344.

How is the CS4344 FILT+_6 pin connected?

The FILT+_6 pin has a capacitor to GND on 10 of 11 designs, most often 10 µF. Counted from the KiCad layouts of 11 open source designs using the CS4344.

How is the CS4344 AOUTL_7 pin connected?

The AOUTL_7 pin has a series capacitor on 10 of 10 designs, most often 3.3 µF. Counted from the KiCad layouts of 11 open source designs using the CS4344.

What parts are used alongside the CS4344?

The 74ALVC164245DGG, CY62148EV30-ZSXI, LPC1754, MCP1824-1802E/OT and MCP1824-2502E/OT appear in the most repositories here.

Which microcontrollers do boards using the CS4344 use?

Most are built on FPGA (5), STM32 (4) and ESP32 (1).

How big is a typical board using the CS4344?

The median is 101.5 × 83 mm, and 50% are two-layer designs.

What is the most popular open source board using the CS4344?

By GitHub stars, Sd2snes by mrehkopf, with 717 stars.

Can I simulate one of these boards using the CS4344 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part