Stm32-drone
About the Stm32-drone PCB
Stm32-drone is an open source STM32 PCB design by Krzysiek-Mistrz, published on GitHub. It is a 2-layer board measuring 85.9 × 82.1 mm, with 12 components from 10 distinct parts.
Its main chip is the STM32F103C8Tx, from the STM32 family. By type, the board carries 5 connectors, 3 resistors, 1 IC, 1 battery holder and 1 capacitor.
It belongs with the robotics & motion designs in this gallery.
From the project
elektronika
Welcome to my electronics repository! This is the place where I store all my ppcbs, models and code for some of my projects1.
This repository serves as a central hub for all the mechanical side of my robotic and automatic projects. It includes pcbs, models, and codes. Here, you will find a diverse collection of my works.
The repository is organized by ECAD programs in which I have designed my PCBS and project type. In these folders you will find each project associated with this program. There's also models folder in which I have prepared all my models for my projects in CAD programs like…
Main components on the Stm32-drone
Stm32-drone bill of materials (BOM)
12 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8Tx | stm32f103 | U1 |
| 1 | RECEIVER | PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | ESC1 VGS | PinSocket_1x03_P2.54mm_Vertical | J8 |
| 1 | ESC2 VGS | PinSocket_1x03_P2.54mm_Vertical | J9 |
| 1 | ESC3 VGS | PinSocket_1x03_P2.54mm_Vertical | J10 |
| 1 | ESC4 VGS | PinSocket_1x03_P2.54mm_Vertical | J11 |
| 1 | 4.7k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | 4.7k |
| 1 | Battery | PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | C | C_Disc_D6.0mm_W4.4mm_P5.00mm | C1 |
| 3 | R | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1k, R10k, R300 |
Stm32-drone design files
The KiCad project lives in the Krzysiek-Mistrz/electronics_robotics_designs repository on GitHub; these links point at the commit this page was built from.
Stm32-drone: common questions
What microcontroller does the Stm32-drone use?
The Stm32-drone is built around the STM32F103C8Tx, from the STM32 family.
How big is the Stm32-drone PCB?
The Stm32-drone measures 85.9 × 82.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stm32-drone?
12 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stm32-drone design files?
From the Krzysiek-Mistrz/electronics_robotics_designs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Stm32-drone design in my own project?
The repository has no license, so all rights stay with Krzysiek-Mistrz. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stm32-drone without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in electronics_robotics_designs
ESP32Aovv rev 0
131 × 122 mm21 parts2LNo license0
ESP32Linefollower
47.5 × 51 mm19 parts2LNo license0
CD4069 Siren
35.1 × 39.4 mm15 parts2LNo license0
L293d motor controller
49.6 × 66 mm14 parts2LNo license0
BC546B Astable Multivibrator
39.1 × 45.1 mm13 parts2LNo license0
AVR/ArduinoArduino Nano Line Follower
39.5 × 60.2 mm11 parts2LNo license0
Ne555-servo controller
53.3 × 50.8 mm10 parts2LNo license0
AVR/ArduinoArduino Nano Radio Transmitter
41.1 × 68.8 mm10 parts2LNo license0
AVR/ArduinoArduino Nano Radio Receiver
38 × 63.3 mm7 parts2LNo license0
Arduino nano flight controller
62.2 × 70.3 mm4 parts2LNo license0
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32LibreVNA
jankae
122 × 98 mm592 parts6LGPL-3.01.6k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k