HardLabs

Arduino Nano Radio Receiver

Krzysiek-Mistrz·electronics_robotics_designs·kicad_pcbs/arduino-nano-drone/radio-receiver/arduino-nano-radio-receiver.kicad_pcb

Arduino Nano Radio Receiver PCB layout, top view — open source AVR/Arduino board by Krzysiek-Mistrz

About the Arduino Nano Radio Receiver PCB

Arduino Nano Radio Receiver is an open source AVR/Arduino PCB design by Krzysiek-Mistrz, published on GitHub. It is a 2-layer board measuring 38 × 63.3 mm, with 7 components from 6 distinct parts.

Its main chip is the Arduino_Nano_v2.x, from the AVR/Arduino family. Other key parts include the AMS1117-3.3 and NRF24L01_Breakout. By type, the board carries 2 ICs, 2 capacitors, 1 module, 1 connector and 1 battery holder.

It belongs with the robotics & motion and rf & radio designs in this gallery.

From the project

elektronika

Welcome to my electronics repository! This is the place where I store all my ppcbs, models and code for some of my projects1.

This repository serves as a central hub for all the mechanical side of my robotic and automatic projects. It includes pcbs, models, and codes. Here, you will find a diverse collection of my works.

The repository is organized by ECAD programs in which I have designed my PCBS and project type. In these folders you will find each project associated with this program. There's also models folder in which I have prepared all my models for my projects in CAD programs like…

Main components on the Arduino Nano Radio Receiver

AMS1117-3.3NRF24L01_BreakoutArduino_Nano_v2.x

Arduino Nano Radio Receiver bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
NRF24L01_Breakout
U2
1
Arduino_Nano_v2.x
A1
1
Conn_01x01_Pin
J1
1
Battery
BT1
2
10u
C1, C2

Arduino Nano Radio Receiver design files

The KiCad project lives in the Krzysiek-Mistrz/electronics_robotics_designs repository on GitHub; these links point at the commit this page was built from.

Arduino Nano Radio Receiver: common questions

What microcontroller does the Arduino Nano Radio Receiver use?

The Arduino Nano Radio Receiver is built around the Arduino_Nano_v2.x, from the AVR/Arduino family.

How big is the Arduino Nano Radio Receiver PCB?

The Arduino Nano Radio Receiver measures 38 × 63.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Arduino Nano Radio Receiver?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Arduino Nano Radio Receiver design files?

From the Krzysiek-Mistrz/electronics_robotics_designs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Arduino Nano Radio Receiver design in my own project?

The repository has no license, so all rights stay with Krzysiek-Mistrz. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Arduino Nano Radio Receiver without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in electronics_robotics_designs

Similar boards