HardLabs

Arduino Nano Line Follower

Krzysiek-Mistrz·electronics_robotics_designs·kicad_pcbs/arduino-nano-line-follower/arduino-nano-line-follower.kicad_pcb

Arduino Nano Line Follower PCB layout, top view — open source AVR/Arduino board by Krzysiek-Mistrz

About the Arduino Nano Line Follower PCB

Arduino Nano Line Follower is an open source AVR/Arduino PCB design by Krzysiek-Mistrz, published on GitHub. It is a 2-layer board measuring 39.5 × 60.2 mm, with 11 components from 11 distinct parts.

Its main chip is the Arduino_Nano_Every, from the AVR/Arduino family. By type, the board carries 5 connectors, 2 capacitors, 1 module, 1 battery holder and 1 switch.

It belongs with the robotics & motion designs in this gallery.

From the project

elektronika

Welcome to my electronics repository! This is the place where I store all my ppcbs, models and code for some of my projects1.

This repository serves as a central hub for all the mechanical side of my robotic and automatic projects. It includes pcbs, models, and codes. Here, you will find a diverse collection of my works.

The repository is organized by ECAD programs in which I have designed my PCBS and project type. In these folders you will find each project associated with this program. There's also models folder in which I have prepared all my models for my projects in CAD programs like…

Main components on the Arduino Nano Line Follower

Arduino_Nano_Every

Arduino Nano Line Follower bill of materials (BOM)

11 components, 11 distinct parts.

QtyPartRefs
1
Arduino_Nano_Every
A1
1
l298_input_pins
J1
1
arduino_vcc_gnd
J2
1
5v_ir_sensors_pins
J3
1
gnd_ir_sensors_pins
J4
1
ir_signal
J6
1
9v_gnd_l293d
9V L298N
1
Battery
BT1
1
pwr_switch
SW2
1
100n
C1
1
10u
C2

Arduino Nano Line Follower design files

The KiCad project lives in the Krzysiek-Mistrz/electronics_robotics_designs repository on GitHub; these links point at the commit this page was built from.

Arduino Nano Line Follower: common questions

What microcontroller does the Arduino Nano Line Follower use?

The Arduino Nano Line Follower is built around the Arduino_Nano_Every, from the AVR/Arduino family.

How big is the Arduino Nano Line Follower PCB?

The Arduino Nano Line Follower measures 39.5 × 60.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Arduino Nano Line Follower?

11 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Arduino Nano Line Follower design files?

From the Krzysiek-Mistrz/electronics_robotics_designs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Arduino Nano Line Follower design in my own project?

The repository has no license, so all rights stay with Krzysiek-Mistrz. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Arduino Nano Line Follower without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in electronics_robotics_designs

Similar boards