Fiddlesticks

kushurox·fiddlesticks_pcb

Fiddlesticks PCB layout, top view — open source STM32 board by kushurox

About the Fiddlesticks PCB

Fiddlesticks is an open source STM32 PCB design by kushurox, published on GitHub under the MIT license. It is a 4-layer board measuring 50 × 50 mm, with 89 components from 39 distinct parts.

Its main chip is the STM32F411CEUx, from the STM32 family. Other key parts include the MCP1640Bx-xCHY, SPX3819M5-L-3-3 and USBLC6-2SC6. By type, the board carries 28 capacitors, 22 resistors, 17 diodes, 4 ICs, 4 modules and 4 transistors.

It belongs with the robotics & motion and sensors designs in this gallery.

From the project

Fiddle Sticks is a hobby flight controller (FC) project I designed using an STM32F411 MCU and lightweight coreless motors. This is my personal project to learn PCB design and get hands-on experience with embedded development.

Fiddle Sticks is a hobby flight controller (FC) project I designed using an STM32F411 MCU and lightweight coreless motors. This is my personal project to learn PCB design and get hands-on experience with embedded development.

- MCU: STM32F411 - Motors: 8520 Coreless DC (brushed) - Sensor: ICM-45605 (symbol from SnapEDA — you will need to download it from SnapEDA if you want to use it) - Purpose: Hobby learning project for PCB design, firmware development, and embedded systems

Main components on the Fiddlesticks

Fiddlesticks bill of materials (BOM)

89 components, 39 distinct parts.

QtyPartRefs
1
MCP1640Bx-xCHY
U1
1
STM32F411CEUx
U2
1
SPX3819M5-L-3-3
U3
1
USBLC6-2SC6
U4
4
Motor_DC
M1, M2, M3, M4
4
AO3400A
Q1, Q2, Q3, Q4
1
8MHz 12pF
Y1
1
Conn_01x02_Pin
J1
1
Conn_01x04_Pin
J2
1
TYPE-C-31-M-12
J4
1
Conn_01x05_Pin
J6
1
ICM-42670-P
MT1
2
TS-1088-AR02016
SW_Push
SW1, SW2
7
ESD5Z3.3
D1, D2, D3, D5, D12, D15, D16
1
RED
D4
4
PMEG2010AEH
D6, D7, D8, D9
4
SS32
D10, D11, D13, D17
1
GREEN
D14
1
200 Ohms @ 100MHz
FB1
1
LQM18PN4R7MFRL
4.7uH
L1
Show 19 more
QtyPartRefs
5
10u
C1, C15, C17, C18, C24
9
100n
C2, C3, C4, C5, C10, C14, C16, C25 +1
2
15pF
C11, C13
2
4.7u
C12, C20
1
10n
C19
1
10uF
C21
1
100nF
C22
1
2.2uF
C26
1
10nF
C29
4
100n
C30, C31, C32, C33
1
35YXJ470M10x16
470uF
C34
3
1k
R1, R8, R22
2
10k
R2, R12
3
0
R3, R9, R17
1
976k
R4
1
309k
R5
6
33k
R6, R7, R15, R16, R20, R21
2
5.1k
R10, R11
4
33
R13, R14, R18, R19

Fiddlesticks design files

The KiCad project lives in the kushurox/fiddlesticks_pcb repository on GitHub; these links point at the commit this page was built from.

Fiddlesticks: common questions

What microcontroller does the Fiddlesticks use?

The Fiddlesticks is built around the STM32F411CEUx, from the STM32 family.

How big is the Fiddlesticks PCB?

The Fiddlesticks measures 50 × 50 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the Fiddlesticks?

89 components, from 39 distinct parts. The full bill of materials is listed on this page.

Where can I download the Fiddlesticks design files?

From the kushurox/fiddlesticks_pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Fiddlesticks design in my own project?

Yes, under the terms of its MIT license, which kushurox chose for the repository.

Can I test firmware for the Fiddlesticks without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards