Cleanhawk250
About the Cleanhawk250 PCB
Cleanhawk250 is an open source PCB design by kylemanna, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 134.5 × 79.7 mm, with 71 components from 31 distinct parts.
Other key parts include the TPS54331. By type, the board carries 24 capacitors, 16 resistors, 10 diodes, 9 connectors, 3 inductors and 2 ICs.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
✈ CleanHawk 250 Support Documentation + Design Files
This document outlines the basic tasks to get the CleanHawk 250 Power Distribution Board (PDB) up and flying.
Documentation can be found at the CleanHawk250 GitHub repository.
The goal of the CleanHawk 250 PDB is to simplify wiring and imporve integration and reliability. The printed circuit board replaces the bottom carbon fiber frame support on the Emax 250 / Nighthawk 250 quadcopters.
Main components on the Cleanhawk250
Cleanhawk250 bill of materials (BOM)
71 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TPS54331 | SOIC-8-1EP_3.9x4.9mm_Pitch1.27mm | U1, U2 |
| 7 | CONN_02X02 | Pin_Header_Straight_2x02 | P1, P2, P3, P4, P5, P7, P8 |
| 1 | CONN_01X0X CONN_01X04 | Pin_Header_Straight_1x04 | P6 |
| 1 | CONN_01X0X CONN_01X06 | Pin_Header_Straight_1x06 | P9 |
| 4 | KISS_ESC_18A | Kiss_ESC_18A_v1.1 | ESC1, ESC2, ESC3, ESC4 |
| 1 | SPECIAL | Emax250_Bottom_Holes | FRAME1 |
| 1 | FILTER SEL | AB2_SJMP_03-1 | JP1 |
| 1 | WIREPADS | WirePads_12AWG_TH | W1 |
| 6 | LED_5050_RGB RGB_LED_5050 | LED_5050_RGB | D1, D2, D3, D4, D5, D6 |
| 4 | B340LB | Diode-SMB_Standard | D7, D8, D9, D10 |
| 1 | 820UH 820uH | Choke_SMD_12x12mm_h6mm | L1 |
| 2 | 8.2UH 8.2uH | Choke_SMD_12x12mm_h6mm | L2, L3 |
| 4 | 33UF/25V 33uF/25V/np | TantalC_SizeD_EIA-7343_Reflow | C1, C2, C3, C4 |
| 2 | 100UF/16V 100uF/16V | TantalC_SizeD_EIA-7343_Reflow | C5, C6 |
| 5 | 10UF/35V 10uF/35V | C_1206 | C7, C9, C10, C18, C19 |
| 2 | 100NF 100nF | C_0603 | C8, C17 |
| 2 | 18PF 18pF | C_0603 | C11, C20 |
| 3 | 22UF/16V 22uF/10V | C_1206 | C12, C13, C14 |
| 2 | 680PF 680pF | C_0603 | C15, C23 |
| 2 | 8.2NF 8.2nF | C_0603 | C16, C24 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 22UF/16V 22uF/16V | C_1206 | C21, C22 |
| 2 | 68 | R_0603 | R1, R3 |
| 2 | 120 | R_0603 | R2, R5 |
| 2 | 68/np | R_0603 | R4, R6 |
| 3 | 10k/1% | R_0603 | R7, R10, R15 |
| 1 | 2.32k/1% | R_0603 | R8 |
| 2 | 78.7K 78.7k | R_0603 | R9, R14 |
| 1 | 1.91k/1% | R_0603 | R11 |
| 1 | 169K 169k/np | R_0603 | R12 |
| 1 | 28K 28k/np | R_0603 | R13 |
| 1 | 976/1% | R_0603 | R16 |
Cleanhawk250 design files
The KiCad project lives in the kylemanna/cleanhawk250 repository on GitHub; these links point at the commit this page was built from.
Cleanhawk250: common questions
How big is the Cleanhawk250 PCB?
The Cleanhawk250 measures 134.5 × 79.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cleanhawk250?
71 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Cleanhawk250 design files?
From the kylemanna/cleanhawk250 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Cleanhawk250 design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which kylemanna chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k