STM32F091 Dev Board
lagunter145·CribCaptain·cc_pcb/stm32f091-ref/stm32f091.kicad_pcb
About the STM32F091 Dev Board
STM32F091 Dev Board is an open source STM32 PCB design by lagunter145, published on GitHub. It is a 4-layer board measuring 20.3 × 85.1 mm, with 46 components from 25 distinct parts.
Its main chip is the STM32F091RCTx, from the STM32 family. Other key parts include the LD1117S33TR_SOT223. By type, the board carries 14 capacitors, 11 resistors, 6 LEDs, 5 connectors, 3 switches and 2 ICs.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the STM32F091 Dev Board
STM32F091 Dev Board bill of materials (BOM)
46 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U1 |
| 1 | STM32F091RCTx | LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | 32.768kHz(12.5pF) | ECX-.327-CDX-1293 | X1 |
| 1 | 8MHz(20pF) | Crystal_SMD_3225-4Pin_3.2x2.5mm | X2 |
| 2 | Conn_01x30_Male | HTSW-130-22-T-S | J1, J2 |
| 1 | Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Vertical | J3 |
| 2 | Conn_02x03_Odd_Even | PinHeader_2x03_P1.27mm_Vertical | J4, J5 |
| 3 | SW_Push | SW_SPST_PTS645 | SW1, SW2, SW3 |
| 2 | LED_Red | LED_0805_2012Metric | LD1, LD6 |
| 2 | LED_Green | LED_0805_2012Metric | LD2, LD4 |
| 1 | LED_Blue | LED_0805_2012Metric | LD3 |
| 1 | LED_Yellow | LED_0805_2012Metric | LD5 |
| 2 | BAT60JFILM | D_SOD-323 | D1, D2 |
| 1 | Ferrite Bead | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 2 | 22uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 8 | .1uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C4, C5, C6, C7, C8, C9, C11 |
| 2 | 12pF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C12, C13 |
| 2 | 20pF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C14, C15 |
| 1 | 5.1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 4 | 1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R4, R5, R8 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R10 |
| 1 | 3k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6 |
| 1 | 2k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7 |
| 1 | 510 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9 |
| 1 | 390 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11 |
STM32F091 Dev Board design files
The KiCad project lives in the lagunter145/CribCaptain repository on GitHub; these links point at the commit this page was built from.
STM32F091 Dev Board: common questions
What microcontroller does the STM32F091 Dev Board use?
The STM32F091 Dev Board is built around the STM32F091RCTx, from the STM32 family.
How big is the STM32F091 Dev Board?
The STM32F091 Dev Board measures 20.3 × 85.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the STM32F091 Dev Board?
46 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32F091 Dev Board design files?
From the lagunter145/CribCaptain repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the STM32F091 Dev Board design in my own project?
The repository has no license, so all rights stay with lagunter145. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32F091 Dev Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in CribCaptain
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k