Cc pcbRedo
About the Cc pcbRedo PCB
Cc pcbRedo is an open source ESP8266 PCB design by lagunter145, published on GitHub. It is a 2-layer board measuring 146.1 × 101.6 mm, with 86 components from 50 distinct parts.
Its main chip is the ESP8266, from the ESP8266 family. Other key parts include the 7in_display_controller, RFID_Scanner, TFT_2.8IN_DISPLAY, 74HC14 and STM32F091RCTx. By type, the board carries 30 resistors, 19 capacitors, 16 diodes, 10 ICs, 7 connectors and 3 inductors.
Main components on the Cc pcbRedo
Cc pcbRedo bill of materials (BOM)
86 components, 50 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP8266 | XCVR_ESP8266-01_ESP-01 | U1 |
| 1 | 7in_display_controller | RA8875_TFT_Breakout | U2 |
| 1 | RFID_Scanner | RFID_Reader_PCB | U3 |
| 1 | TFT_2.8IN_DISPLAY | tft_2.8in_touch_display | U4 |
| 1 | 74HC14 | SN74HC14N | U5 |
| 1 | STM32F091RCTx | LQFP-64_10x10mm_P0.5mm | U6 |
| 1 | MEZD71201AF | 5-3.3_buck_converter | U7 |
| 1 | TPS56325x | SOT-563 | U8 |
| 1 | 4N28 | DIP-6_W7.62mm | U9 |
| 1 | MAX7375AXR805 | SOT-323_SC-70 | U10 |
| 1 | Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Vertical | J1 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | microSD_HC_Hirose_DM3AT-SF-PEJM5 | J2 |
| 1 | 4x4 Keypad | 4x4_keypad | J3 |
| 1 | DC-DC_JUMPER | PinSocket_2x03_P2.54mm_Vertical | J4 |
| 1 | PS_WIRES | PS_2_Wire | J5 |
| 1 | PS_BJ | barrel_jack_adapter | J6 |
| 1 | DC-DC Converter | 7.5Vdc-5Vdc_buck_converter | J7 |
| 1 | SW_Push | SW_SPST_PTS645 | SW1 |
| 1 | LED_RED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LED_YELLOW | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
Show 30 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED_GREEN | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 4 | LED | LED_D3.0mm | D4, D5, D6, D7 |
| 3 | BAT60JFILM | D_SOD-323 | D8, D9, D16 |
| 6 | 1N5822 | DIO_1N5822 | D10, D11, D12, D13, D14, D15 |
| 1 | FerriteBead | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1 |
| 1 | 1m | irl_toroid_inductor | L1 |
| 1 | 2.2uH | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L2 |
| 9 | .1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C8, C15 +1 |
| 3 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C10, C13 |
| 1 | 2.2uf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
| 2 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C14 |
| 1 | 33pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 1 | 1m | CP_Radial_D12.5mm_P5.00mm | C17 |
| 1 | 10m | C_Radial_D18.0mm_H35.5mm_P7.50mm | C18 |
| 1 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 4 | 100K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R5, R14, R19 |
| 3 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R26, R27 |
| 1 | 2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 8 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7, R8, R9, R10, R11, R12, R13 |
| 4 | 150 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R16, R17, R18 |
| 1 | 11k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | 820 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
| 1 | 68 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22 |
| 1 | 220k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23 |
| 1 | 30k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24 |
| 1 | .33M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25 |
| 1 | 300 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28 |
| 1 | 0 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29 |
| 1 | 10 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R30 |
Cc pcbRedo design files
The KiCad project lives in the lagunter145/CribCaptain repository on GitHub; these links point at the commit this page was built from.
Cc pcbRedo: common questions
What microcontroller does the Cc pcbRedo use?
The Cc pcbRedo is built around the ESP8266, from the ESP8266 family.
How big is the Cc pcbRedo PCB?
The Cc pcbRedo measures 146.1 × 101.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cc pcbRedo?
86 components, from 50 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cc pcbRedo design files?
From the lagunter145/CribCaptain repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Cc pcbRedo design in my own project?
The repository has no license, so all rights stay with lagunter145. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Cc pcbRedo without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in CribCaptain
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398