Augmented reality glasses
Lakshay983·augmented-reality-glasses·hardware/AR-Breakout/AR-Breakout.kicad_pcb
About the Augmented reality glasses PCB
Augmented reality glasses is an open source PCB design by Lakshay983, published on GitHub under the MIT license. It is a 2-layer board measuring 85.4 × 33.9 mm, with 32 components from 15 distinct parts.
Other key parts include the TXS0108EPWR. By type, the board carries 11 resistors, 7 diodes, 5 connectors, 4 capacitors, 2 ICs and 2 transistors.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the Augmented reality glasses
Augmented reality glasses bill of materials (BOM)
32 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TXS0108EPWR | TXS0108EPWR | U2 |
| 1 | ~ | USB-C-TRIGGER | U3 |
| 2 | IRLML0030 | SOT-23 | Q1, Q2 |
| 1 | 5V_Inject | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | ~ | TW2002TD170SM | J2 |
| 1 | Logic Analyzer | CONN_SFH11-xxxC-D05-ST-XX_SUL | J3 |
| 1 | 3.3V_Inject | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Barrel_Jack_Switch | BarrelJack_GCT_DCJ200-10-A_Horizontal | J5 |
| 1 | AZ1117CH-3.3TRG1 | AZ1117CH-3.3TRG1 | VR1 |
| 4 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4 |
| 3 | PWR_LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6, D7, D8 |
| 2 | .1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 1 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 11 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +3 |
Augmented reality glasses design files
The KiCad project lives in the Lakshay983/augmented-reality-glasses repository on GitHub; these links point at the commit this page was built from.
Augmented reality glasses: common questions
How big is the Augmented reality glasses PCB?
The Augmented reality glasses measures 85.4 × 33.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Augmented reality glasses?
32 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Augmented reality glasses design files?
From the Lakshay983/augmented-reality-glasses repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Augmented reality glasses design in my own project?
Yes, under the terms of its MIT license, which Lakshay983 chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979