29 open source boards using the TXS0108EPWR
Real designs built with the TXS0108EPWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
My jetson nano baseboard
NVIDIA-AI-IOT
80 × 100 mm232 parts4LCustom license91FPGA
Gb fpga
blazer82
80.1 × 78.6 mm132 parts4LTAPR-OHL-1.012Open covg daq
lucask07
157.8 × 95.2 mm596 parts6LGPL-3.09SCALES Leviathan V2
BroncoSpace-Lab
100 × 100 mm415 parts6LNo license696boards robomezzi
mwelling
85 × 54 mm112 parts4LCC-BY-SA-4.06DECA RETRO CAPE 2
somhi
100 × 100 mm43 parts2LNo license5FPGA
ZYNQ7020 Development Board
dj140
86 × 69 mm121 parts4LNo license2Raspberry Pi
Central control unit
RomLab
255.9 × 224.5 mm735 parts4LNo license1RP2040/RP2350
Billee hardware-2027
BILLEE-BroncoSTAR
240 × 90.5 mm265 parts4LMIT1AVR/Arduino
DAQ Board
sparkerBCI
105.4 × 58.9 mm138 parts4LNo license1CircuitBoardV2
Technologyman00
57.4 × 132.3 mm48 parts2LGPL-3.01Dev board1
tbennellick
250 × 167.9 mm775 parts6LNo license0AVR/Arduino
Ccboard
troisiemetype
135 × 124 mm177 parts2LNo license0ESP32
Light Jacket rev0 2 - Mousebites
loganma02
68 × 70 mm87 parts2LNo license0EEE3088F HAT
rb-jones
96 × 70 mm68 parts2LCC-BY-4.00RP2040/RP2350
Meshboy
Milk-Cool
51 × 60.7 mm46 parts2LMIT0Augmented reality glasses
Lakshay983
85.4 × 33.9 mm32 parts2LMIT0Boardoza BMI088 6-Axis IMU Breakout Board
Boardoza
40 × 20 mm16 parts2LCC-BY-SA-4.00ESP32
Jchc1-hardware
GutFarms
100 × 70 mm15 parts4LNo license0AVR/Arduino
HB-UNI-644
alexreinert
79 × 78 mm64 parts2LCC-BY-NC-4.0104STM32
MSPBMP
grumat
73.7 × 38.1 mm62 parts2LGPL-2.015FPGA
Hi board
blazer82
81 × 117 mm55 parts4LTAPR-OHL-1.012KNeoPix
OpenKNX
24.5 × 34.6 mm23 parts4LNo license1Initial physical
tbennellick
64.2 × 40.6 mm481 parts6LNo license0ESP32
Light Jacket rev0 21
loganma02
68 × 70 mm87 parts2LNo license0ESP32
Light Jacket rev0 2 - No Breakout
loganma02
55 × 70 mm78 parts2LNo license0STM32
Device
jayis1
85 × 54 mm21 parts4LNo license3Ovc2 mobo
osrf
87 × 81 mm189 parts6LApache-2.0207STM32
MSPBMP2-stick
grumat
51.5 × 20 mm48 parts2LGPL-2.015
How designs wire the TXS0108EPWR
Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the TXS0108EPWR connects to, and the resistors, capacitors and other passives placed on it.
- The VCCA pin has a decoupling capacitor on 14 of 22 designs, most often 100 nF (then 10 nF).
- The VCCB pin has a decoupling capacitor on 14 of 21 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCApin 2 | Connected to: 3.3V 68% · a signal 32% |
|
| GNDpin 11 | Connected to: GND 90% | — |
| VCCBpin 19 | Connected to: 5V 86% |
|
17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ovc2 mobo by osrf, HB-UNI-644 by alexreinert, My jetson nano baseboard by NVIDIA-AI-IOT and MSPBMP by grumat.
The TXS0108EPWR in open source designs
The gallery holds 29 open source boards using the TXS0108EPWR from 24 GitHub repositories; a typical one measures about 85 × 70 mm and carries around 87 components.
55% use four copper layers or more, and 45% carry an open source license.
The most starred is Ovc2 mobo by osrf.
Parts used alongside the TXS0108EPWR
Microcontrollers on boards using the TXS0108EPWR
What boards using the TXS0108EPWR are built for
TXS0108EPWR: common questions
Where can I find a TXS0108EPWR reference design?
Each of the 29 boards on this page is a real design using the TXS0108EPWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TXS0108EPWR VCCA pin?
The VCCA pin has a decoupling capacitor on 14 of 22 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 22 open source designs using the TXS0108EPWR.
What decoupling capacitors do designs use on the TXS0108EPWR VCCB pin?
The VCCB pin has a decoupling capacitor on 14 of 21 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 22 open source designs using the TXS0108EPWR.
What parts are used alongside the TXS0108EPWR?
The AMS1117-3.3, LM3480-3.3, MCP9808T-E/MS and TCA4307DGKR appear in the most repositories here.
Which microcontrollers do boards using the TXS0108EPWR use?
Most are built on ESP32 (4), AVR/Arduino (3), FPGA (3) and STM32 (3).
How big is a typical board using the TXS0108EPWR?
The median is 85 × 70 mm, and 45% are two-layer designs.
What is the most popular open source board using the TXS0108EPWR?
By GitHub stars, Ovc2 mobo by osrf, with 207 stars.
Can I simulate one of these boards using the TXS0108EPWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.