Wireless uhat rpi radio module-2 eeprom joke

Lannakin·rpi-pico-pizero-wireless-uhat-rpi-radio-module-2·misc/joke/wireless-uhat-rpi-radio-module-2_eeprom-joke.kicad_pcb

Wireless uhat rpi radio module-2 eeprom joke layout, top view — open source board by Lannakin

About the Wireless uhat rpi radio module-2 eeprom joke

Wireless uhat rpi radio module-2 eeprom joke is an open source PCB design by Lannakin, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 65 × 30 mm, with 12 components from 9 distinct parts.

Other key parts include the CAT24C256_EP and RMC20452. By type, the board carries 6 resistors, 2 ICs, 1 connector, 1 jumper, 1 inductor and 1 capacitor.

It belongs with the rf & radio and iot & wireless designs in this gallery.

From the project

an awful uhat form factor board for the rp2350 or other raspberry pi microcontroller-based boards in the raspberry pi zero form factor. it is designed by a cat with bad hobbies and indescribable delusions.

WebPlusToshibaSat8x14 and WebPlusToshibaSat9x16 by VileR scientifica © 2020 Akshay Oppiliappan (nerdy@peppe.rs)

This project is to adapt the Raspberry Pi Radio Module 2 (RM2) (p/n RMC20452) to the μHat specification, minus the EEPROM chip, as the RM2 is not compatible with anything except the Raspberry Pi microcontrollers (RPIMCU). The main reason I am doing this is because I have an RP2350B A4 revision chip, which is part of a Waveshare RP2350-PiZero board. I wish I knew what the hell their tables in the 40Pin OUT section meant for sure. Oh well, thank y'all for making the schematic public.

Main components on the Wireless uhat rpi radio module-2 eeprom joke

CAT24C256_EPRMC20452

Wireless uhat rpi radio module-2 eeprom joke bill of materials (BOM)

12 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CAT24C256_EP
U1
1
RMC20452
U2
1
GPIO
J1
1
ID_WP
JP1
1
BLM18EG471SN1D
L1
1
0603YC104K4T4A
0.1uF
C1
2
ERA-6AEB392V
3.9k
R1, R7
2
ERA-6AEB471V
470
R3, R4
2
ERA-6AEB103V
10k
R5, R6

Wireless uhat rpi radio module-2 eeprom joke design files

The KiCad project lives in the Lannakin/rpi-pico-pizero-wireless-uhat-rpi-radio-module-2 repository on GitHub; these links point at the commit this page was built from.

Wireless uhat rpi radio module-2 eeprom joke: common questions

How big is the Wireless uhat rpi radio module-2 eeprom joke?

The Wireless uhat rpi radio module-2 eeprom joke measures 65 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Wireless uhat rpi radio module-2 eeprom joke?

12 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Wireless uhat rpi radio module-2 eeprom joke design files?

From the Lannakin/rpi-pico-pizero-wireless-uhat-rpi-radio-module-2 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Wireless uhat rpi radio module-2 eeprom joke design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which Lannakin chose for the repository.

More boards in rpi-pico-pizero-wireless-uhat-rpi-radio-module-2

Similar boards