Radio Module 2 uHAT for Pico Series
Lannakin·rpi-pico-pizero-wireless-uhat-rpi-radio-module-2·r0-0-0/wireless-uhat-tht-rpi-radio-module-2.kicad_pcb
About the Radio Module 2 uHAT for Pico Series
Radio Module 2 uHAT for Pico Series is an open source PCB design by Lannakin, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 65 × 30 mm, with 11 components from 7 distinct parts.
Other key parts include the RMC20452. By type, the board carries 6 resistors, 2 LEDs, 1 module, 1 connector and 1 inductor.
It belongs with the rf & radio and iot & wireless designs in this gallery.
From the project
an awful uhat form factor board for the rp2350 or other raspberry pi microcontroller-based boards in the raspberry pi zero form factor. it is designed by a cat with bad hobbies and indescribable delusions.
WebPlusToshibaSat8x14 and WebPlusToshibaSat9x16 by VileR scientifica © 2020 Akshay Oppiliappan (nerdy@peppe.rs)
This project is to adapt the Raspberry Pi Radio Module 2 (RM2) (p/n RMC20452) to the μHat specification, minus the EEPROM chip, as the RM2 is not compatible with anything except the Raspberry Pi microcontrollers (RPIMCU). The main reason I am doing this is because I have an RP2350B A4 revision chip, which is part of a Waveshare RP2350-PiZero board. I wish I knew what the hell their tables in the 40Pin OUT section meant for sure. Oh well, thank y'all for making the schematic public.
Main components on the Radio Module 2 uHAT for Pico Series
Radio Module 2 uHAT for Pico Series bill of materials (BOM)
11 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RMC20452 | rpi_rmc20452t | A1 |
| 1 | GPIO | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | 599-0060-007F YL-GN | LED_599-00XX-137F_0603_1608Metric | LED1 |
| 1 | 599-0090-137F BU | LED_599-00XX-137F_0603_1608Metric | LED2 |
| 1 | BLM18EG471SN1D | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 4 | ERA-6AEB471V 470 | R_ERA-6A_0805_2012Metric | R3, R4, R7, R8 |
| 2 | ERA-6AEB103V 10k | R_ERA-6A_0805_2012Metric | R5, R6 |
Radio Module 2 uHAT for Pico Series design files
The KiCad project lives in the Lannakin/rpi-pico-pizero-wireless-uhat-rpi-radio-module-2 repository on GitHub; these links point at the commit this page was built from.
Radio Module 2 uHAT for Pico Series: common questions
How big is the Radio Module 2 uHAT for Pico Series?
The Radio Module 2 uHAT for Pico Series measures 65 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Radio Module 2 uHAT for Pico Series?
11 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Radio Module 2 uHAT for Pico Series design files?
From the Lannakin/rpi-pico-pizero-wireless-uhat-rpi-radio-module-2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Radio Module 2 uHAT for Pico Series design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which Lannakin chose for the repository.
More boards in rpi-pico-pizero-wireless-uhat-rpi-radio-module-2
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kRadioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568