作业三b NTC数字温度计 底板预览
Larryhul·periodic-signal-analyzer·02_课程作业/作业三_NTC数字温度计/KiCad工程/作业三b_NTC数字温度计/作业三b_NTC数字温度计_底板预览.kicad_pcb
About the 作业三b NTC数字温度计 底板预览 PCB
作业三b NTC数字温度计 底板预览 is an open source PCB design by Larryhul, published on GitHub under the MIT license. It is a 4-layer board measuring 167 × 92 mm, with 21 components from 8 distinct parts.
By type, the board carries 13 resistors, 4 transistors and 2 connectors.
It belongs with the test & measurement designs in this gallery.
From the project
STM32G474 periodic signal analyzer: FFT harmonic measurement (Upp/Urms/fundamental/spectrum), OPA2365 front end, KiCad PCB, firmware & dashboard. 2026 Shanghai electronic design contest, Problem G. 周期信号测量分析装置
课程围绕一个主线案例——基于 NTC 热敏电阻的数字温度计——依次训练:电路系统设计方法、TINA 仿真、STM32 单片机开发、KiCad 画板。这里是我的作业与记录,仅供参考。
- 作业三没有精密标定设备,报告只验证了信号链和变化趋势,没有声明绝对测温精度。 - 课程最终选了申优课题(电赛 G 题)代替基础课题,所以基础大作业只做到原理图,申优作品见 ../03申优电赛G题。
作业三b NTC数字温度计 底板预览 bill of materials (BOM)
21 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | S9013 (E-B-C) | TO-92_Inline_EBC | Q1, Q2, Q3, Q4 |
| 1 | MINISYS_G030_LEFT | PinSocket_1x16_P2.54mm_Vertical | J1 |
| 1 | MINISYS_G030_RIGHT | PinSocket_1x16_P2.54mm_Vertical | J2 |
| 1 | XL-DA3461SRBC | XL-DA3461SRBC_PREVIEW | DS1 |
| 1 | NTC 10k B3950 | R_Axial_DIN0204_L3.6mm_P7.62mm_Horizontal | RT1 |
| 1 | 10k 1% | R_Axial_DIN0204_L3.6mm_P7.62mm_Horizontal | R1 |
| 8 | 470 | R_Axial_DIN0204_L3.6mm_P7.62mm_Horizontal | R2, R3, R4, R5, R6, R7, R8, R9 |
| 4 | 1k | R_Axial_DIN0204_L3.6mm_P7.62mm_Horizontal | R10, R11, R12, R13 |
作业三b NTC数字温度计 底板预览 design files
The KiCad project lives in the Larryhul/periodic-signal-analyzer repository on GitHub; these links point at the commit this page was built from.
作业三b NTC数字温度计 底板预览: common questions
How big is the 作业三b NTC数字温度计 底板预览 PCB?
The 作业三b NTC数字温度计 底板预览 measures 167 × 92 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the 作业三b NTC数字温度计 底板预览?
21 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the 作业三b NTC数字温度计 底板预览 design files?
From the Larryhul/periodic-signal-analyzer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the 作业三b NTC数字温度计 底板预览 design in my own project?
Yes, under the terms of its MIT license, which Larryhul chose for the repository.
More boards in periodic-signal-analyzer
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kEleLab v2 Frontpanel a
Chrismettal
88 × 25 mm23 parts2LGPL-3.0528EleLab v2 Bus150
Chrismettal
150 × 50 mm37 parts2LGPL-3.0528EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528