P2
About the P2 PCB
P2 is an open source AVR/Arduino PCB design by larsimmisch, published on GitHub. It is a 2-layer board measuring 86.4 × 45.7 mm, with 28 components from 22 distinct parts.
Its main chip is the ATmega328-AU, from the AVR/Arduino family. Other key parts include the TPIC6595 and MAX6100. By type, the board carries 12 connectors, 7 capacitors, 4 ICs, 3 resistors, 1 crystal and 1 switch.
Main components on the P2
P2 bill of materials (BOM)
28 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TPIC6595 | SOIC-20W_7.5x12.8mm_P1.27mm | U1, U2 |
| 1 | ATmega328-AU | TQFP-32_7x7mm_P0.8mm | U3 |
| 1 | MAX6100 | SOT-23 | U4 |
| 1 | Crystal | Crystal_HC18-U_Vertical | Y1 |
| 1 | 12v | PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | Channels | PinSocket_2x05_P2.54mm_Vertical | J2 |
| 1 | Noritake | PinSocket_2x05_P2.54mm_Vertical | J3 |
| 1 | POWER | PinSocket_2x05_P2.54mm_Vertical | J4 |
| 1 | Q | PinSocket_1x04_P2.54mm_Vertical | J5 |
| 1 | Volume | PinSocket_2x05_P2.54mm_Vertical | J6 |
| 1 | PGM | PinSocket_1x06_P2.54mm_Vertical | J7 |
| 1 | AVR-ISP-6 | PinSocket_2x03_P2.54mm_Vertical | J8 |
| 1 | PWR1 | PinSocket_1x02_P2.54mm_Vertical | J9 |
| 1 | PWR2 | PinSocket_1x02_P2.54mm_Vertical | J10 |
| 1 | r1 | PinSocket_1x02_P2.54mm_Vertical | J11 |
| 1 | r2 | PinSocket_1x02_P2.54mm_Vertical | J12 |
| 1 | SW_DIP_x01 | SW_SPST_B3S-1000 | SW1 |
| 2 | 22pF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2 |
| 4 | 100nF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C5, C6, C7 |
| 1 | 1u | C_Rect_L4.6mm_W3.0mm_P2.50mm_MKS02_FKP02 | C4 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10k | R_0603_1608Metric | R1 |
| 2 | 4k7 | R_0603_1608Metric | R2, R3 |
P2 design files
The KiCad project lives in the larsimmisch/lci-kicad repository on GitHub; these links point at the commit this page was built from.
- LayoutP2/P2.kicad_pcb
P2: common questions
What microcontroller does the P2 use?
The P2 is built around the ATmega328-AU, from the AVR/Arduino family.
How big is the P2 PCB?
The P2 measures 86.4 × 45.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the P2?
28 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the P2 design files?
From the larsimmisch/lci-kicad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the P2 design in my own project?
The repository has no license, so all rights stay with larsimmisch. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the P2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in lci-kicad
Peak detect
33 × 59.7 mm65 parts2LNo license0
+-12v
108 × 65 mm36 parts2LNo license0
Waterpi
65 × 56 mm34 parts2LNo license0
A1x pre
41.8 × 29.6 mm29 parts2LNo license0
Water switches
66 × 20.3 mm26 parts2LNo license0
P4
65 × 56 mm26 parts2LNo license0
AVR/ArduinoP3
86.4 × 45.7 mm26 parts2LNo license0
ESP8266Espsense
66 × 68.6 mm20 parts2LNo license0
Mute
54.6 × 30.5 mm13 parts2LNo license0
Mixer
35.6 × 38.1 mm12 parts2LNo license0
Headphone power
57.2 × 34.3 mm12 parts2LNo license0
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k