7 open source boards using the TPIC6595

Real designs built with the TPIC6595, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the TPIC6595

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPIC6595 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 100 µF).
  • The DRAIN0 pin has a series resistor on 3 of 5 designs, most often 560 Ω (then 100 Ω).
  • The DRAIN1 pin has a series resistor on 3 of 5 designs, most often 560 Ω (then 100 Ω).
  • The DRAIN2 pin has a series resistor on 3 of 5 designs, most often 560 Ω (then 100 Ω).
PGNDpin 1, 10, 11, 20Connected to: GND 90%
VCCpin 2Connected to: 5V 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (4), 100 µF (1)
DRAIN0pin 4Connected to: A connector 40%
  • Series resistor on 60% · 560 Ω (1), 100 Ω (1), 13 Ω (1)
DRAIN1pin 5Connected to: A connector 40%
  • Series resistor on 60% · 560 Ω (1), 100 Ω (1), 13 Ω (1)
DRAIN2pin 6Connected to: A connector 40%
  • Series resistor on 60% · 560 Ω (1), 100 Ω (1), 13 Ω (1)
DRAIN3pin 7Connected to: A connector 40%
  • Series resistor on 60% · 560 Ω (1), 100 Ω (1), 13 Ω (1)
SRCLRpin 8Connected to: A connector 40%, TPIC6595 40%
  • Pull-up to 5V on 60% · 10 kΩ (3)
DRAIN4pin 14Connected to: Signal 80% · not connected 20%
  • Series resistor on 60% · 560 Ω (1), 100 Ω (1), 13 Ω (1)
DRAIN5pin 15Connected to: A connector 40%
  • Series resistor on 60% · 560 Ω (1), 100 Ω (1), 13 Ω (1)
DRAIN6pin 16Connected to: A connector 40%
  • Series resistor on 60% · 560 Ω (1), 100 Ω (1), 13 Ω (1)
DRAIN7pin 17Connected to: A connector 40%
  • Series resistor on 60% · 560 Ω (1), 13 Ω (1), 100 Ω (1)
LGNDpin 19Connected to: GND 100%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Training board v02 by BeeHive-org, SevenSegmentClockV2 by atomic14, Chrkpl by dl9lj and P2 by larsimmisch.

The TPIC6595 in open source designs

The gallery holds 7 open source boards using the TPIC6595 from 5 GitHub repositories; a typical one measures about 100 × 60 mm and carries around 28 components.

100% are two-layer designs, the rest use four layers or more, and 86% carry an open source license.

The most starred is Training board v02 by BeeHive-org.

Microcontrollers on boards using the TPIC6595

What boards using the TPIC6595 are built for

TPIC6595: common questions

Where can I find a TPIC6595 reference design?

Each of the 7 boards on this page is a real design using the TPIC6595. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TPIC6595 VCC pin?

The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 100 µF). Counted from the KiCad layouts of 5 open source designs using the TPIC6595.

What resistor goes on the TPIC6595 DRAIN0 pin?

The DRAIN0 pin has a series resistor on 3 of 5 designs, most often 560 Ω (then 100 Ω). Counted from the KiCad layouts of 5 open source designs using the TPIC6595.

What resistor goes on the TPIC6595 DRAIN1 pin?

The DRAIN1 pin has a series resistor on 3 of 5 designs, most often 560 Ω (then 100 Ω). Counted from the KiCad layouts of 5 open source designs using the TPIC6595.

Which microcontrollers do boards using the TPIC6595 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the TPIC6595?

The median is 100 × 60 mm, and 100% are two-layer designs.

What is the most popular open source board using the TPIC6595?

By GitHub stars, Training board v02 by BeeHive-org, with 13 stars.

Can I simulate one of these boards using the TPIC6595 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part