Balloon Shield
laurenoo·ENCE_3210_Lauren_Ooghe_2026·Documentation_D/Balloon_Shield.kicad_pcb
About the Balloon Shield
Balloon Shield is an open source PCB design by laurenoo, published on GitHub. It is a 2-layer board measuring 53.3 × 53.8 mm, with 21 components from 12 distinct parts.
Other key parts include the EXT TEMP. By type, the board carries 7 connectors, 6 diodes, 6 resistors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the Balloon Shield
Balloon Shield bill of materials (BOM)
21 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | EXT TEMP | TO-92_Inline_Wide | U2 |
| 1 | Power | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Digital/PWM | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Analog | PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Digital/PWM | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04 | DIP-8_W7.62mm_Socket_LongPads | J5 |
| 1 | Conn_01x06 | PinSocket_1x06_P2.54mm_Vertical | J7 |
| 1 | Conn_01x07 | PinSocket_1x07_P2.54mm_Vertical | J8 |
| 1 | HDC1080 | Texas_PWSON-N6 | HDC1080 |
| 6 | LED | LED_D5.0mm | D1, D2, D3, D4, D5, D6 |
| 2 | 100K R | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 4 | 20K R | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R4, R5, R6 |
Balloon Shield design files
The KiCad project lives in the laurenoo/ENCE_3210_Lauren_Ooghe_2026 repository on GitHub; these links point at the commit this page was built from.
Balloon Shield: common questions
How big is the Balloon Shield?
The Balloon Shield measures 53.3 × 53.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Balloon Shield?
21 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Balloon Shield design files?
From the laurenoo/ENCE_3210_Lauren_Ooghe_2026 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Balloon Shield design in my own project?
The repository has no license, so all rights stay with laurenoo. Use it as a reference, and ask the author before reusing the design.
More boards in ENCE_3210_Lauren_Ooghe_2026
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979