Uno Shield DSP
laurenoo·ENCE_3210_Lauren_Ooghe_2026·Documentation_B/KiCad_design/Uno_Shield_DSP.kicad_pcb
About the Uno Shield DSP
Uno Shield DSP is an open source PCB design by laurenoo, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 46 components from 20 distinct parts.
Other key parts include the MCP6002-XP. By type, the board carries 27 resistors, 11 connectors, 2 switches, 2 capacitors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
* SEE PCBV1 FOLDER FOR COMPLETED PROJECT CONTENTS ****
* SEE PCBV1 FOLDER FOR COMPLETED PROJECT CONTENTS ****
4-bit DAC was created on the breadboard to simulate output response to a given digital input. The ramp.ino file was created using ChatGPT due to limited time and understanding of the design. I would like to try to build a 10-bit DAC and measure the output to get a smooth continuous output without clipping. In order to prevent clipping, I need to figure out the appropriate resistor values needed for the DC offset on the op-amp.
Main components on the Uno Shield DSP
Uno Shield DSP bill of materials (BOM)
46 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP6002-XP MCP6002-xP | DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | Power | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Digital/PWM | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Analog | PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Digital/PWM | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | IMU | PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | OLED | PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | JUMPER | PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | AUDIO_IN | PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | AUDIO_OUT | PinHeader_1x03_P2.54mm_Vertical | J11 |
| 2 | AUDIOJACK5 AudioJack5 | Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J12, J13 |
| 3 | 100K 100k | Potentiometer_Bourns_3386P_Vertical | RV1, RV2, RV3 |
| 1 | BT_2 | SW_PUSH_6mm | SW1 |
| 1 | BT_1 | SW_PUSH_6mm | SW2 |
| 1 | 47UF 47uF | CP_Radial_D8.0mm_P2.50mm | C1 |
| 1 | 100PF 47uF | C_Disc_D4.7mm_W2.5mm_P5.00mm | C2 |
| 2 | 100K 100k | R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R1, R2 |
| 14 | 20K 20k | R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R3, R4, R5, R6, R7, R8, R9, R10 +6 |
| 10 | 10K 10k | R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R14, R15, R16, R17, R18, R19, R20, R21 +2 |
| 1 | 1k | R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R25 |
Uno Shield DSP design files
The KiCad project lives in the laurenoo/ENCE_3210_Lauren_Ooghe_2026 repository on GitHub; these links point at the commit this page was built from.
Uno Shield DSP: common questions
How big is the Uno Shield DSP?
The Uno Shield DSP measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Uno Shield DSP?
46 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Uno Shield DSP design files?
From the laurenoo/ENCE_3210_Lauren_Ooghe_2026 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Uno Shield DSP design in my own project?
The repository has no license, so all rights stay with laurenoo. Use it as a reference, and ask the author before reusing the design.
More boards in ENCE_3210_Lauren_Ooghe_2026
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979