Esp32 c6 rf
LayerDynamics·KiClaude·examples/esp32_c6_rf/esp32_c6_rf.kicad_pcb
About the Esp32 c6 rf PCB
Esp32 c6 rf is an open source ESP32 PCB design by LayerDynamics, published on GitHub. It is a 4-layer board measuring 60 × 50 mm, with 7 components from 5 distinct parts.
Its main chip is the ESP32-C6-MINI-1, from the ESP32 family. Other key parts include the BGA-16. By type, the board carries 4 capacitors, 2 ICs and 1 connector.
From the project
Browser-native, AI-native, KiCad-compatible EDA — Claude Code's hardware counterpart.
kiclaude is a browser-native, AI-native, KiCad-compatible EDA suite. You open a .kicadpro project in a browser tab, chat with Claude in the sidebar, and every action — "add a USB-C PD trigger for 9 V, with proper decoupling and a fuse", "route the high-speed pairs first, then power", "is this board ready to fab?" — becomes a typed tool call that round-trips back to real .kicadsch / .kicadpcb` files on disk. Diffable. Reviewable. Yours.
Main components on the Esp32 c6 rf
Esp32 c6 rf bill of materials (BOM)
7 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C6-MINI-1 | ESP32-C6-MINI-1 | U1 |
| 1 | BGA-16 | BGA-16_1.92x1.92mm_Layout4x4_P0.5mm | U2 |
| 1 | U.FL | U.FL_Molex_MCRF_73412-0110_Vertical | J1 |
| 2 | 100nF | C_0402_1005Metric | C1, C2 |
| 2 | 4.7uF | C_0402_1005Metric | C3, C4 |
Esp32 c6 rf design files
The KiCad project lives in the LayerDynamics/KiClaude repository on GitHub; these links point at the commit this page was built from.
Esp32 c6 rf: common questions
What microcontroller does the Esp32 c6 rf use?
The Esp32 c6 rf is built around the ESP32-C6-MINI-1, from the ESP32 family.
How big is the Esp32 c6 rf PCB?
The Esp32 c6 rf measures 60 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Esp32 c6 rf?
7 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32 c6 rf design files?
From the LayerDynamics/KiClaude repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp32 c6 rf design in my own project?
The repository has no license, so all rights stay with LayerDynamics. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp32 c6 rf without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k