HardLabs

Misc Control Card (1) (2)

lbrosnan1·quboElectrical·Cards/Misc. Card/miscellaneous_card_4_21_26/Misc_Control_Card (1) (2).kicad_pcb

Misc Control Card (1) (2) PCB layout, top view — open source STM32 board by lbrosnan1

About the Misc Control Card (1) (2) PCB

Misc Control Card (1) (2) is an open source STM32 PCB design by lbrosnan1, published on GitHub. It is a 4-layer board measuring 99.9 × 62 mm, with 42 components from 26 distinct parts.

Its main chip is the STM32G0B1RETx, from the STM32 family. Other key parts include the ATA6561-GAQW-N. By type, the board carries 8 connectors, 8 resistors, 7 capacitors, 6 ICs, 4 transistors and 1 crystal.

From the project

Stores the KiCAD PCB files for Qubo

Guys I have no idea what I'm doing here so if you have any suggestions lmk -Liam

1) Only commit changes to the card you are meant to be working on 2) leave helpful commit messages 3) you don't need to follow the naming scheme because I'm pretty sure we can just see the date the latest change was 4) Put cool silkscreen on your boards

Main components on the Misc Control Card (1) (2)

STM32G0B1RETxATA6561-GAQW-N

Misc Control Card (1) (2) bill of materials (BOM)

42 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
Conn_01x02
IC2Port1, IC2Port2, IC2Port3
1
~
U1
1
STM32G0B1RETx
U5
1
ATA6561-GAQW-N
U6
3
NDT3055L
Q1, Q2, Q3
1
IRLZ44N
Q5
1
16Mhz
Y1
2
Conn_01x03_Pin
J1, J9
1
Conn_01x02
J2
1
Conn_01x02
J3
2
Conn_01x02
J4, J5
1
Screw_Terminal_01x02
J7
1
Conn_01x03
J8
1
10k
BOOT_R1
1
4.7uF
Bulk 4.7uF
1
1uF
Bulk_1
1
22uF
Bulk_22
1
Fuse
F2
1
HV9923N8-G
LED_DRIVER1
2
100nF
T_Cd1, T_Cd2
Show 6 more
QtyPartRefs
4
100nF
C1, C5, C6, C7
2
10pF
C2, C3
1
100 µF
C4
3
220
R1, R2, R3
4
10k
R4, R5, R6, R10k
1
330
R8

Misc Control Card (1) (2) design files

The KiCad project lives in the lbrosnan1/quboElectrical repository on GitHub; these links point at the commit this page was built from.

Misc Control Card (1) (2): common questions

What microcontroller does the Misc Control Card (1) (2) use?

The Misc Control Card (1) (2) is built around the STM32G0B1RETx, from the STM32 family.

How big is the Misc Control Card (1) (2) PCB?

The Misc Control Card (1) (2) measures 99.9 × 62 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Misc Control Card (1) (2)?

42 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Misc Control Card (1) (2) design files?

From the lbrosnan1/quboElectrical repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Misc Control Card (1) (2) design in my own project?

The repository has no license, so all rights stay with lbrosnan1. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Misc Control Card (1) (2) without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in quboElectrical

Similar boards