HardLabs

Misc Control Card v4

lbrosnan1·quboElectrical·Cards/Misc. Card/Misc_Control_Card_v4.kicad_pcb

Misc Control Card v4 PCB layout, top view — open source STM32 board by lbrosnan1

About the Misc Control Card v4 PCB

Misc Control Card v4 is an open source STM32 PCB design by lbrosnan1, published on GitHub. It is a 2-layer board measuring 99.9 × 62 mm, with 57 components from 26 distinct parts.

Its main chip is the STM32G0B1RETx, from the STM32 family. Other key parts include the ATA6561-GAQW-N. By type, the board carries 12 capacitors, 12 resistors, 7 connectors, 6 ICs, 6 transistors and 1 crystal.

From the project

Stores the KiCAD PCB files for Qubo

Guys I have no idea what I'm doing here so if you have any suggestions lmk -Liam

1) Only commit changes to the card you are meant to be working on 2) leave helpful commit messages 3) you don't need to follow the naming scheme because I'm pretty sure we can just see the date the latest change was 4) Put cool silkscreen on your boards

Main components on the Misc Control Card v4

STM32G0B1RETxATA6561-GAQW-N

Misc Control Card v4 bill of materials (BOM)

57 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
Conn_01x02
IC2_P1, IC2_P2, IC2_P3
1
~
U1
1
STM32G0B1RETx
U5
1
ATA6561-GAQW-N
U6
6
NDT3055L
Q1, Q2, Q3, Q4, Q5, Q6
1
16Mhz
Y1
2
Conn_01x03_Pin
J1, J9
1
Conn_01x02
J2
2
Conn_01x02
J4, J5
1
Screw_Terminal_01x02
J7
1
Conn_01x03
J8
4
Conn_01x02
3.3Port1, 3.3Port2, 5VPort1, 5Volt2
1
10k
BOOT_R1
1
1uF
Bulk_1
1
4.7uF
Bulk_4.7
1
22uF
Bulk_22
2
Conn_01x04
LED_Connection1, LED_Connection2
1
HV9923N8-G
LED_DRIVER1
2
100nF
T_Cd1, T_Cd2
2
100nf
C1, C8
Show 6 more
QtyPartRefs
2
10pF
C2, C3
3
100 µF
C4, C9, C10
3
100nF
C5, C6, C7
2
1 µF
C11, C12
6
220
R1, R2, R3, R10, R11, R12
6
10k
R4, R5, R6, R7, R8, R9

Misc Control Card v4 design files

The KiCad project lives in the lbrosnan1/quboElectrical repository on GitHub; these links point at the commit this page was built from.

Misc Control Card v4: common questions

What microcontroller does the Misc Control Card v4 use?

The Misc Control Card v4 is built around the STM32G0B1RETx, from the STM32 family.

How big is the Misc Control Card v4 PCB?

The Misc Control Card v4 measures 99.9 × 62 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Misc Control Card v4?

57 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Misc Control Card v4 design files?

From the lbrosnan1/quboElectrical repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Misc Control Card v4 design in my own project?

The repository has no license, so all rights stay with lbrosnan1. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Misc Control Card v4 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in quboElectrical

Similar boards