Game-Board
ldjonesinator·Game-Board·game_board_design/game_board_design.kicad_sch
About the Game-Board
Game-Board is an open source STM32 PCB design by ldjonesinator, published on GitHub. It is a board, with 58 components from 28 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the USBLC6-2SC6 and ME6217C33M5G. By type, the board carries 22 resistors, 12 capacitors, 8 switches, 7 diodes, 3 ICs and 3 connectors.
From the project
Wanted to improve my pcb design, and CAD skills so I decided to make a little game board with a STM32 microcontroller.
Main components on the Game-Board
Game-Board bill of materials (BOM)
58 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | STM32F103C8T6 | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | ME6217C33M5G | SOT-23-5 | U3 |
| 1 | BRCS3404MC | SOT-23-3 | Q1 |
| 1 | 8MHz | Crystal_HC49-4H_Vertical | Y1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2, J3 |
| 1 | PS1240P02BT | Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 1 | RESET | SW_SMD_Yuandi_TS-1092S-B3D2-G | SW1 |
| 1 | SKLYABE015 | SW2 | |
| 1 | NAV_N | SW_SMD_XUNPU TS-1002S-09026C | SW3 |
| 1 | NAV_S | SW_SMD_XUNPU TS-1002S-09026C | SW4 |
| 1 | NAV_E | SW_SMD_XUNPU TS-1002S-09026C | SW5 |
| 1 | NAV_W | SW_SMD_XUNPU TS-1002S-09026C | SW6 |
| 1 | LBUMP | SW_SPST_Omron_B3F-315x_Angled | SW7 |
| 1 | RBUMP | SW8 | |
| 6 | BLUE | LED_0603_1608Metric | D1, D2, D3, D4, D5, D6 |
| 1 | GREEN | LED_0603_1608Metric | D7 |
| 3 | 10u | C_0603_1608Metric | C1, C11, C12 |
| 5 | 100n | C_0603_1608Metric | C2, C3, C4, C5, C8 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10n | C_0603_1608Metric | C6 |
| 1 | 1u | C_0603_1608Metric | C7 |
| 2 | 30p | C_0603_1608Metric | C9, C10 |
| 2 | 5.1k | R_0603_1608Metric | R1, R2 |
| 4 | 1k5 | R_0603_1608Metric | R3, R7, R8, R11 |
| 1 | 10k | R_0603_1608Metric | R4 |
| 14 | 1k | R_0603_1608Metric | R5, R6, R9, R12, R13, R14, R15, R16 +6 |
| 1 | 500 | R_0603_1608Metric | R10 |
Game-Board design files
The KiCad project lives in the ldjonesinator/Game-Board repository on GitHub; these links point at the commit this page was built from.
Game-Board: common questions
What microcontroller does the Game-Board use?
The Game-Board is built around the STM32F103C8T6, from the STM32 family.
How many components are on the Game-Board?
58 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Game-Board design files?
From the ldjonesinator/Game-Board repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Game-Board design in my own project?
The repository has no license, so all rights stay with ldjonesinator. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Game-Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k