11 open source boards using the ME6217C33M5G

Real designs built with the ME6217C33M5G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the ME6217C33M5G

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the ME6217C33M5G connects to, and the resistors, capacitors and other passives placed on it.

  • The VOUT pin has a decoupling capacitor on 10 of 10 designs, most often 10 µF (then 100 nF).
  • The VIN pin has a decoupling capacitor on 8 of 10 designs, most often 10 µF (then 22 µF).
  • The CE pin is tied to 5V on 9 of 10 designs.
VINpin 1Connected to: 5V 90%
  • Decoupling capacitor on 80% · 10 µF (7), 22 µF (2)
VSSpin 2Connected to: GND 100%
CEpin 3Connected to: 5V 90%
NCpin 4Connected to: Not connected 100%
VOUTpin 5Connected to: 3.3V 90%
  • Decoupling capacitor on 100% · 10 µF (9), 100 nF (3), 2.2 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Multiprobe by picolemon, Sparkles old by hdsjulian, Pico stretch2 by jvanderberg and Archive by gzt-de.

The ME6217C33M5G in open source designs

The gallery holds 11 open source boards using the ME6217C33M5G from 11 GitHub repositories; a typical one measures about 59.3 × 46.5 mm and carries around 59 components.

60% are two-layer designs, the rest use four layers or more, and 55% carry an open source license.

The most starred is Multiprobe by picolemon.

Microcontrollers on boards using the ME6217C33M5G

ME6217C33M5G: common questions

Where can I find a ME6217C33M5G reference design?

Each of the 11 boards on this page is a real design using the ME6217C33M5G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ME6217C33M5G VOUT pin?

The VOUT pin has a decoupling capacitor on 10 of 10 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 10 open source designs using the ME6217C33M5G.

What decoupling capacitors do designs use on the ME6217C33M5G VIN pin?

The VIN pin has a decoupling capacitor on 8 of 10 designs, most often 10 µF (then 22 µF). Counted from the KiCad layouts of 10 open source designs using the ME6217C33M5G.

How is the ME6217C33M5G CE pin connected?

The CE pin is tied to 5V on 9 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the ME6217C33M5G.

What parts are used alongside the ME6217C33M5G?

The ESP32-S3-WROOM-1, TP4056_C725790, USBLC6-2SC6, XB4908A and XL-1608SYGC-06 appear in the most repositories here.

Which microcontrollers do boards using the ME6217C33M5G use?

Most are built on ESP32 (6), RP2040/RP2350 (2), AVR/Arduino (1) and STM32 (1).

How big is a typical board using the ME6217C33M5G?

The median is 59.3 × 46.5 mm, and 60% are two-layer designs.

What is the most popular open source board using the ME6217C33M5G?

By GitHub stars, Multiprobe by picolemon, with 13 stars.

Can I simulate one of these boards using the ME6217C33M5G before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part