AWG
About the AWG PCB
AWG is an open source PCB design by Lee34667, published on GitHub. It is a 4-layer board measuring 86 × 33.6 mm, with 55 components from 27 distinct parts.
Other key parts include the 10 MHz, TL1963A, 3.3V, C8051F380-GQ, AD9744 and REF2033. By type, the board carries 27 capacitors, 10 resistors, 6 ICs, 5 connectors, 4 test points and 1 switch.
From the project
Creating a L9110 module using PCB techniques.
Contains some the PCB projects I have done using KiCad. Most of this boards have been used in the industries and research work.
Main components on the AWG
AWG bill of materials (BOM)
55 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10 MHz | Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mm | U1 |
| 1 | TL1963A, 3.3V | SOT-89-3 | U2 |
| 1 | C8051F380-GQ | TQFP-48_7x7mm_P0.5mm | U3 |
| 1 | AD9744 | TSSOP-28_4.4x9.7mm_P0.65mm | U4 |
| 1 | REF2033 | SOT-23-5 | U5 |
| 1 | AD8063ARTZ-R2 Analog Devices | SOT95P280X145-6 | U6 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.00mm_Horizontal | J1 |
| 1 | Conn_Coaxial | SMB_Jack_Vertical | J2 |
| 1 | Conn_01x08_Socket | PinSocket_1x08_P2.00mm_Horizontal | J3 |
| 2 | 7769 | KEYSTONE_7769 | J4, J5 |
| 1 | ICS-40618 | MIC_ICS-40618 | MIC1 |
| 1 | SW_Nidec_CAS-120A1 | Nidec_Copal_CAS-120A | SW1 |
| 4 | TestPoint | TestPoint_Loop_D2.50mm_Drill1.0mm | TP1, TP2, TP3, TP4 |
| 1 | 3A | L_Ferrocore_DLG-0302 | FB1 |
| 17 | 0.1uF | C_0805_2012Metric | C1, C4, C9, C11, C12, C13, C14, C16 +9 |
| 1 | 0.47uF | C_0805_2012Metric | C2 |
| 1 | 0.022uF | C_0805_2012Metric | C3 |
| 1 | 47uF | CP_EIA-3528-12_Kemet-T | C5 |
| 1 | 4.7uF | CP_EIA-3528-12_Kemet-T | C6 |
| 4 | 4.7uF | C_0805_2012Metric | C7, C8, C10, C15 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2nF | C_0805_2012Metric | C20 |
| 1 | 0.1pF | C_0805_2012Metric | C22 |
| 2 | 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R7 |
| 3 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R8, R9 |
| 2 | 25 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 2 | 499 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6 |
| 1 | 2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
AWG design files
The KiCad project lives in the Lee34667/PCB_Kicad_Projects repository on GitHub; these links point at the commit this page was built from.
- LayoutAWG/AWG.kicad_pcb
- SchematicAWG/AWG.kicad_sch
AWG: common questions
How big is the AWG PCB?
The AWG measures 86 × 33.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the AWG?
55 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the AWG design files?
From the Lee34667/PCB_Kicad_Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the AWG design in my own project?
The repository has no license, so all rights stay with Lee34667. Use it as a reference, and ask the author before reusing the design.
More boards in PCB_Kicad_Projects
ESP32Pixel click
82.4 × 59.6 mm130 parts4LNo license1
USB Project
67.8 × 70.6 mm54 parts4LNo license1
ESP8266SMS
22.5 × 110.8 mm42 parts2LNo license1
STM32STEM32
44.7 × 35.8 mm28 parts2LNo license1
RS485
74.7 × 40.1 mm26 parts2LNo license1
BBBC
76.8 × 32.8 mm24 parts2LNo license1
AVR/ArduinoIRS
79 × 78 mm23 parts2LNo license1
Solar Power Regulator
68.6 × 86.4 mm23 parts4LNo license1
Two Phase Bipolar Stepper Motor Controller
89.9 × 116.8 mm21 parts8LNo license1
L9110
24 × 38 mm15 parts4LNo license1
Passive Buzzer Module
12.5 × 34.5 mm4 parts4LNo license1