5 open source boards using the AD9744
Real designs built with the AD9744, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
CPArti-FPGA-Development-Board
AAWO
100 × 100 mm393 parts4LNo license13Basebandboard
adamgreig
50 × 50 mm80 parts2LNo license2RP2040/RP2350
HVDC test board
MECSEM
120 × 120 mm287 parts4LGPL-3.00AWG
Lee34667
86 × 33.6 mm55 parts4LNo license1AD9744 Test
BehrensG
50 × 44 mm35 parts2LNo license0
How designs wire the AD9744
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the AD9744 connects to, and the resistors, capacitors and other passives placed on it.
- The IOUTB pin has a series resistor on 5 of 5 designs, most often 225 Ω (then 226 Ω).
- The REFIO pin has a capacitor to GND on 4 of 5 designs, most often 100 nF (then 4.7 µF).
- The FS_ADJ pin has a resistor to GND on 4 of 5 designs, most often 2 kΩ (then 500 Ω).
- The IOUTB pin has a resistor to GND on 4 of 5 designs, most often 25 Ω (then 25.5 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| D13pin 1 | Connected to: Signal 100% |
|
| D12pin 2 | Connected to: Signal 100% |
|
| D11pin 3 | Connected to: Signal 60% · not connected 20% · 3.3V 20% |
|
| D10pin 4 | Connected to: Signal 100% |
|
| D9pin 5 | Connected to: Signal 100% |
|
| D8pin 6 | Connected to: Signal 80% · not connected 20% |
|
| D7pin 7 | Connected to: Signal 100% |
|
| D6pin 8 | Connected to: Signal 100% |
|
| D5pin 9 | Connected to: Signal 100% |
|
| D4pin 10 | Connected to: Signal 80% · GND 20% |
|
| D3pin 11 | Connected to: Signal 80% · 3.3V 20% |
|
| D2pin 12 | Connected to: Signal 100% |
|
| D1pin 13 | Connected to: Signal 80% · not connected 20% |
|
| D0pin 14 | Connected to: Signal 60% · GND 40% |
|
| SLEEPpin 15 | Connected to: Not connected 60% · GND 20% · a signal 20% | — |
| REFIOpin 17 | Connected to: Signal 60% · GND 20% · 3.3V 20% |
|
| FS_ADJpin 18 | Connected to: Signal 80% · 3.3V 20% |
|
| NCpin 19, 23 | Connected to: Not connected 80% | — |
| AGNDpin 20 | Connected to: GND 100% | — |
| IOUTBpin 21 | Connected to: Signal 100% |
|
| IOUTApin 22 | Connected to: Signal 80% · GND 20% |
|
| AVDDpin 24 | Connected to: Signal 60% · 3.3V 40% |
|
| MODEpin 25 | Connected to: Signal 60% · not connected 40% |
|
| DGNDpin 26 | Connected to: GND 100% | — |
| DVDDpin 27 | Connected to: Signal 80% · 3.3V 20% |
|
| CLKpin 28 | Connected to: Signal 80% · not connected 20% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CPArti-FPGA-Development-Board by AAWO, Basebandboard by adamgreig, AWG by Lee34667 and AD9744 Test by BehrensG.
The AD9744 in open source designs
The gallery holds 5 open source boards using the AD9744 from 5 GitHub repositories; a typical one measures about 86 × 50 mm and carries around 80 components.
60% use four copper layers or more, and 20% carry an open source license.
The most starred is CPArti-FPGA-Development-Board by AAWO.
Parts used alongside the AD9744
Microcontrollers on boards using the AD9744
What boards using the AD9744 are built for
AD9744: common questions
Where can I find a AD9744 reference design?
Each of the 5 boards on this page is a real design using the AD9744. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the AD9744 IOUTB pin?
The IOUTB pin has a series resistor on 5 of 5 designs, most often 225 Ω (then 226 Ω). Counted from the KiCad layouts of 5 open source designs using the AD9744.
How is the AD9744 REFIO pin connected?
The REFIO pin has a capacitor to GND on 4 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the AD9744.
What resistor goes on the AD9744 FS_ADJ pin?
The FS_ADJ pin has a resistor to GND on 4 of 5 designs, most often 2 kΩ (then 500 Ω). Counted from the KiCad layouts of 5 open source designs using the AD9744.
Which microcontrollers do boards using the AD9744 use?
Most are built on FPGA (1) and RP2040/RP2350 (1).
How big is a typical board using the AD9744?
The median is 86 × 50 mm, and 40% are two-layer designs.
What is the most popular open source board using the AD9744?
By GitHub stars, CPArti-FPGA-Development-Board by AAWO, with 13 stars.
Can I simulate one of these boards using the AD9744 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.