5 open source boards using the REF2033
Real designs built with the REF2033, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Harp.device.quac
AllenNeuralDynamics
90 × 100 mm276 parts4LMIT0STM32
GDI-STM
rusefi
154 × 160 mm304 parts4LNo license48AWG
Lee34667
86 × 33.6 mm55 parts4LNo license1STM32
INV Discrete Controller
NTURacingTeam
100 × 100 mm351 parts4LNo license0STM32
INV Boost Controller
NTURacingTeam
100 × 100 mm256 parts4LNo license0
The REF2033 in open source designs
The gallery holds 5 open source boards using the REF2033 from 4 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 276 components.
100% use four copper layers or more, and 20% carry an open source license.
The most starred is GDI-STM by rusefi.
Microcontrollers on boards using the REF2033
REF2033: common questions
Where can I find a REF2033 reference design?
Each of the 5 boards on this page is a real design using the REF2033. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the REF2033 use?
Most are built on STM32 (3) and RP2040/RP2350 (1).
How big is a typical board using the REF2033?
The median is 100 × 100 mm, and 0% are two-layer designs.
What is the most popular open source board using the REF2033?
By GitHub stars, GDI-STM by rusefi, with 48 stars.
Can I simulate one of these boards using the REF2033 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.