Solar Power Regulator
About the Solar Power Regulator PCB
Solar Power Regulator is an open source PCB design by Lee34667, published on GitHub. It is a 4-layer board measuring 68.6 × 86.4 mm, with 23 components from 17 distinct parts.
Other key parts include the LT3652EDD. By type, the board carries 6 capacitors, 6 resistors, 5 connectors, 2 diodes, 1 IC and 1 battery holder.
It belongs with the power & battery designs in this gallery.
From the project
Creating a L9110 module using PCB techniques.
Contains some the PCB projects I have done using KiCad. Most of this boards have been used in the industries and research work.
Main components on the Solar Power Regulator
Solar Power Regulator bill of materials (BOM)
23 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LT3652EDD | DFN-12-1EP_3x3mm_P0.45mm_EP1.65x2.38mm | U1 |
| 1 | DCJ200-10-A-XX-K_REVA | GCT_DCJ200-10-A-XX-K_REVA | J1 |
| 3 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2, J3, J5 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J4 |
| 1 | EECRG0V105H | CAPRD2000W100L650D1900 | BT1 |
| 1 | 10k | Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 2 | Diode | D_A-405_P7.62mm_Horizontal | D1, D2 |
| 1 | 68uH | L_1812_4532Metric_Pad1.30x3.40mm_HandSolder | L1 |
| 1 | 10uF | C_Rect_L10.0mm_W2.5mm_P7.50mm_MKS4 | C1 |
| 2 | 10uF | C_Disc_D5.1mm_W3.2mm_P5.00mm | C2, C3 |
| 1 | 10uF | C_Radial_D5.0mm_H7.0mm_P2.00mm | C4 |
| 1 | 47uF | C_Radial_D5.0mm_H7.0mm_P2.00mm | C5 |
| 1 | 47uF | C_Rect_L10.0mm_W2.5mm_P7.50mm_MKS4 | C6 |
| 2 | 220k | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R1, R3 |
| 1 | 47k | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R2 |
| 1 | 0.066 | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R4 |
| 2 | 10k | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R5, R6 |
Solar Power Regulator design files
The KiCad project lives in the Lee34667/PCB_Kicad_Projects repository on GitHub; these links point at the commit this page was built from.
Solar Power Regulator: common questions
How big is the Solar Power Regulator PCB?
The Solar Power Regulator measures 68.6 × 86.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Solar Power Regulator?
23 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Solar Power Regulator design files?
From the Lee34667/PCB_Kicad_Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Solar Power Regulator design in my own project?
The repository has no license, so all rights stay with Lee34667. Use it as a reference, and ask the author before reusing the design.
More boards in PCB_Kicad_Projects
ESP32Pixel click
82.4 × 59.6 mm130 parts4LNo license1
AWG
86 × 33.6 mm55 parts4LNo license1
USB Project
67.8 × 70.6 mm54 parts4LNo license1
ESP8266SMS
22.5 × 110.8 mm42 parts2LNo license1
STM32STEM32
44.7 × 35.8 mm28 parts2LNo license1
RS485
74.7 × 40.1 mm26 parts2LNo license1
BBBC
76.8 × 32.8 mm24 parts2LNo license1
AVR/ArduinoIRS
79 × 78 mm23 parts2LNo license1
Two Phase Bipolar Stepper Motor Controller
89.9 × 116.8 mm21 parts8LNo license1
L9110
24 × 38 mm15 parts4LNo license1
Passive Buzzer Module
12.5 × 34.5 mm4 parts4LNo license1
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k