Instrumentation Amplifier Demo
LeemanGeophysicalLLC·Instrumentation_Amplifier_Demo_PCB·KiCAD_Project/instrumentation_amplifier/instrumentation_amplifier.kicad_pcb
About the Instrumentation Amplifier Demo PCB
Instrumentation Amplifier Demo is an open source PCB design by LeemanGeophysicalLLC, published on GitHub under the MIT license. It is a 2-layer board measuring 127 × 76.2 mm, with 25 components from 19 distinct parts.
Other key parts include the 1-0000801 and 1-0000465. By type, the board carries 10 resistors, 6 connectors, 4 capacitors, 2 ICs, 1 switch and 1 diode.
It belongs with the audio and test & measurement designs in this gallery.
From the project
Instrumentation amplifier learning/demo PCB.
Main components on the Instrumentation Amplifier Demo
Instrumentation Amplifier Demo bill of materials (BOM)
25 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1-0000801 | 1-0000801 | U1 |
| 1 | 1-0000465 | 1-0000465 | U2 |
| 1 | 1-0000001 | 1-0000001 | CON1 |
| 2 | 1-0000120 | 1-0000120 | J1, J4 |
| 2 | 0-0000000 Jumper | PinHeader_2x02_P2.54mm_Vertical | J2, J3 |
| 1 | 0-0000000 NP_Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | 3-0000087 barepcb | barepcb | PCB1 |
| 1 | 1-0000852 | 1-0000852 | SW1 |
| 1 | 1-0000598 | 1-0000598 | D1 |
| 2 | 1-0000018 | 1-0000018 | C1, C4 |
| 2 | 1-0000007 | 1-0000007 | C2, C3 |
| 1 | 1-0000008 | 1-0000008 | R1 |
| 2 | 1-0000010 | 1-0000010 | R2, R5 |
| 2 | 1-0000011 | 1-0000011 | R3, R4 |
| 1 | 1-0000006 | 1-0000006 | R6 |
| 1 | 1-0000851 | 1-0000851 | R7 |
| 1 | 1-0000177 | 1-0000177 | R8 |
| 1 | 1-0000179 | 1-0000179 | R9 |
| 1 | 1-0000112 | 1-0000112 | R10 |
Instrumentation Amplifier Demo design files
The KiCad project lives in the LeemanGeophysicalLLC/Instrumentation_Amplifier_Demo_PCB repository on GitHub; these links point at the commit this page was built from.
Instrumentation Amplifier Demo: common questions
How big is the Instrumentation Amplifier Demo PCB?
The Instrumentation Amplifier Demo measures 127 × 76.2 mm, has 2 copper layers and is 0.04064 mm thick.
How many components are on the Instrumentation Amplifier Demo?
25 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Instrumentation Amplifier Demo design files?
From the LeemanGeophysicalLLC/Instrumentation_Amplifier_Demo_PCB repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Instrumentation Amplifier Demo design in my own project?
Yes, under the terms of its MIT license, which LeemanGeophysicalLLC chose for the repository.
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kUSB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956