HardLabs

Seguidor linea docs

leithcoX·seguidor_linea_docs·KiCanvas/modulo_seguidor.kicad_pcb

Seguidor linea docs PCB layout, top view — open source AVR/Arduino board by leithcoX

About the Seguidor linea docs PCB

Seguidor linea docs is an open source AVR/Arduino PCB design by leithcoX, published on GitHub. It is a 2-layer board measuring 146.3 × 79.8 mm, with 26 components from 16 distinct parts.

Its main chip is the ARDUINO_NANO_V2.X, from the AVR/Arduino family. Other key parts include the LM7806_TO220 and L298N. By type, the board carries 9 diodes, 4 capacitors, 4 resistors, 3 modules, 2 ICs and 2 connectors.

Main components on the Seguidor linea docs

LM7806_TO220L298NARDUINO_NANO_V2.X

Seguidor linea docs bill of materials (BOM)

26 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM7806_TO220
U1
1
L298N
U2
1
ARDUINO_NANO_V2.X
Arduino_Nano_v2.x
A1
1
Motor_IZQ
M1
1
Motor_DER
M2
1
Battery
J1
1
puerto sensores
J6
1
SW_Push
SW1
1
SW_NIDEC_CAS-120A1
SW_Nidec_CAS-120A1
SW2
1
LED
D1
8
D
D2, D3, D4, D5, D6, D7, D8, D9
2
1u
C1, C2
2
100NF
100nF
C3, C4
1
1k
R1
1
330
R2
2
33
R3, R4

Seguidor linea docs design files

The KiCad project lives in the leithcoX/seguidor_linea_docs repository on GitHub; these links point at the commit this page was built from.

Seguidor linea docs: common questions

What microcontroller does the Seguidor linea docs use?

The Seguidor linea docs is built around the ARDUINO_NANO_V2.X, from the AVR/Arduino family.

How big is the Seguidor linea docs PCB?

The Seguidor linea docs measures 146.3 × 79.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Seguidor linea docs?

26 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Seguidor linea docs design files?

From the leithcoX/seguidor_linea_docs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Seguidor linea docs design in my own project?

The repository has no license, so all rights stay with leithcoX. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Seguidor linea docs without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards