5 open source boards using the LM7806_TO220

Real designs built with the LM7806_TO220, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the LM7806_TO220

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LM7806_TO220 connects to, and the resistors, capacitors and other passives placed on it.

  • The VI pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 100 nF).
  • The VO pin has a capacitor to GND on 4 of 5 designs, most often 100 nF (then 10 µF).
VIpin 1Connected to: VCC 60% · a signal 40%
  • Decoupling capacitor on 100% · 10 µF (3), 100 nF (2), 330 nF (1)
GNDpin 2Connected to: GND 100%
VOpin 3Connected to: Signal 60% · 6V 40%
  • Capacitor to GND on 80% · 100 nF (3), 10 µF (1), 1 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Automated road marker by bytecod3, Modulador triangular by G-Leonel-6, Seguidor linea docs by leithcoX and NotePad by Meteopresscz.

The LM7806_TO220 in open source designs

The gallery holds 5 open source boards using the LM7806_TO220 from 5 GitHub repositories; a typical one measures about 146.3 × 189.8 mm and carries around 61 components.

100% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is NotePad by Meteopresscz.

Microcontrollers on boards using the LM7806_TO220

What boards using the LM7806_TO220 are built for

LM7806_TO220: common questions

Where can I find a LM7806_TO220 reference design?

Each of the 5 boards on this page is a real design using the LM7806_TO220. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LM7806_TO220 VI pin?

The VI pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the LM7806_TO220.

How is the LM7806_TO220 VO pin connected?

The VO pin has a capacitor to GND on 4 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the LM7806_TO220.

Which microcontrollers do boards using the LM7806_TO220 use?

Most are built on AVR/Arduino (3).

How big is a typical board using the LM7806_TO220?

The median is 146.3 × 189.8 mm, and 100% are two-layer designs.

What is the most popular open source board using the LM7806_TO220?

By GitHub stars, NotePad by Meteopresscz, with 0 stars.

Can I simulate one of these boards using the LM7806_TO220 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part