ZED BREAKOUT v32
les4675·CubeSatTimeCard·KiCAD/Reimport/ZED_BREAKOUT v32.kicad_pcb
About the ZED BREAKOUT v32
ZED BREAKOUT v32 is an open source PCB design by les4675, published on GitHub under the MIT license. It is a 2-layer board measuring 127 × 98 mm, with 15 components from 4 distinct parts.
It belongs with the dev boards & breakouts and science & space designs in this gallery.
From the project
Currently we have developed models from the top level overview of our time card, along with setting up the SOM. Our goal in the next few months is program the SOM to take in data from a GNSS through the CAN protcol and to fine tone the PLL with the atomic clock that we have aquir
Currently we have developed models from the top level overview of our time card, along with setting up the SOM. Our goal in the next few months is program the SOM to take in data from a GNSS through the CAN protcol and to fine tone the PLL with the atomic clock that we have aquired.
ZED BREAKOUT v32 bill of materials (BOM)
15 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TD-120-G-AACON40_2X20_TU_HTS_SAI | CON40_2X20_TU_HTS_SAI | J1, J2 |
| 4 | — | 3,2-PAD | E$1, E$2, E$3, E$4 |
| 7 | MOUNT-PAD-ROUND5.0 | 5,0-PAD_237 | H1, H2, H3, H801, H802, H803, H804 |
| 2 | 61083-102402LF | 61083-102402LF_1104291 | JX1, JX2 |
ZED BREAKOUT v32 design files
The KiCad project lives in the les4675/CubeSatTimeCard repository on GitHub; these links point at the commit this page was built from.
ZED BREAKOUT v32: common questions
How big is the ZED BREAKOUT v32?
The ZED BREAKOUT v32 measures 127 × 98 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ZED BREAKOUT v32?
15 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ZED BREAKOUT v32 design files?
From the les4675/CubeSatTimeCard repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the ZED BREAKOUT v32 design in my own project?
Yes, under the terms of its MIT license, which les4675 chose for the repository.
More boards in CubeSatTimeCard
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979