DB10
lfg-seth·OpenControlHead·hardware/db10/DB10.kicad_pcb
About the DB10 PCB
DB10 is an open source PCB design by lfg-seth, published on GitHub under the Custom license license. It is a 2-layer board measuring 175.5 × 44 mm, with 76 components from 13 distinct parts.
Other key parts include the 74AHCT125. By type, the board carries 26 diodes, 25 capacitors, 11 resistors, 10 switches, 3 connectors and 1 IC.
It belongs with the retro computing designs in this gallery.
From the project
Open source retrofit of a Motorola O9 Control Head for automotive use
Main components on the DB10
DB10 bill of materials (BOM)
76 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74AHCT125 | SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 2 | Power In | SolderWire-0.5sqmm_1x06_P4.8mm_D0.9mm_OD2.3mm | J3, J6 |
| 1 | Wire In | SolderWire-0.5sqmm_1x06_P4.8mm_D0.9mm_OD2.3mm | J5 |
| 10 | SW_SPST | SW_SPST_TL3342 | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +2 |
| 16 | APA102-2020 | LED-APA102-2020 | D1, D2, D3, D4, D5, D6, D7, D8 +8 |
| 10 | 1N914WT | D_SOD-323_HandSoldering | D18, D19, D20, D21, D22, D23, D24, D25 +2 |
| 17 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 +9 |
| 7 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C11, C20, C21, C22, C23, C24 |
| 1 | 1000uF | CP_Elec_8x6.7 | C19 |
| 2 | 47R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 5 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R7, R8, R9 |
| 2 | 100R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R11 |
DB10 design files
The KiCad project lives in the lfg-seth/OpenControlHead repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/db10/DB10.kicad_pcb
- Schematichardware/db10/DB10.kicad_sch
DB10: common questions
How big is the DB10 PCB?
The DB10 measures 175.5 × 44 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DB10?
76 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the DB10 design files?
From the lfg-seth/OpenControlHead repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DB10 design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k