DataAcq-Sunlight

lhr-solar·DataAcq-SunlightPCB

DataAcq-Sunlight PCB layout, top view — open source STM32 board by lhr-solar

About the DataAcq-Sunlight PCB

DataAcq-Sunlight is an open source STM32 PCB design by lhr-solar, published on GitHub. It is a 2-layer board measuring 95 × 82 mm, with 142 components from 80 distinct parts.

Its main chip is the STM32F429ZITx, from the STM32 family. Other key parts include the RI3-1205S, NCP1117-3.3_SOT223, LAN8742A-CZ-TR, USBLC6-4SC6 and MTK3339. By type, the board carries 50 capacitors, 39 resistors, 12 connectors, 12 diodes, 10 ICs and 7 test points.

It belongs with the rf & radio, power & battery and usb & debug tools designs in this gallery.

From the project

Firmware: https://github.com/lhr-solar/Sunlight

Firmware: https://github.com/lhr-solar/Sunlight

This hardware includes a GPS, IMU, SD Card Reader, CAN interface, and Ethernet interface. The software on this board is responsible for data collection on the solar vehicle.

Mouser Cart (GPS module purchased directly from Adafruit)

DataAcq-Sunlight, from the project README
From the project README

Main components on the DataAcq-Sunlight

DataAcq-Sunlight bill of materials (BOM)

142 components, 80 distinct parts.

QtyPartRefs
1
STM32F429ZITx
U1
1
RI3-1205S
U2
1
NCP1117-3.3_SOT223
U3
1
LAN8742A-CZ-TR
U4
1
USBLC6-4SC6
U5
1
MTK3339
U7
1
BNO055
U8
1
CP2102N-A01-GQFN24
U9
1
ADM3055E
U10
1
CDSOT23-T24CAN
U11
1
8M
Y1
1
25M
Y2
1
32.768k
Y3
1
CAN_LogicAnalyzer
J1
1
IMU_LogicAnalyzer
J2
1
GPS_LogicAnalyzer
J3
1
SDCard_LogicAnalyzer
J5
1
SWD
J6
1
PowerConn
J7
1
RJ45_Abracon_ARJP11A-MASA-B-A-EMU2
J8
Show 60 more
QtyPartRefs
1
Micro_SD_Card_Det
J9
1
SMAConn
J10
1
USB_B_Micro
J11
1
CAN_In
J12
1
CAN_Out
J13
2
CR1220
BT1, BT2
1
Termination RES
JP1
1
Reset
SW1
1
RTCC_BattCheck
SW2
1
GPS_BattCheck
SW3
1
+12V_TP
TP1
1
GNDPWR_TP
TP2
1
+5V_TP
TP3
1
GND_TP
TP4
1
+3.3V_TP
TP5
1
CAN_H
TP6
1
CAN_L
TP7
1
PowerOn
D1
1
RTCC_BattCheck
D2
1
GPS_BattCheck
D3
1
GPS_FIX
D4
1
SP0503BAHTG
D5
1
RTDArray
D6
1
MPPT1
D7
1
MPPT0
D8
1
Motor
D9
1
Dashboard
D10
1
BPS
D11
1
Heartbeat
D12
1
600
FB1
2
2k
L1, L2
27
0.1u
C1, C2, C5, C6, C7, C9, C10, C11 +19
2
18p
C3, C4
2
1u
C8, C27
2
4.7u
C20, C40
1
10u
C21
4
10u
C22, C23, C42, C47
2
30p
C24, C25
1
470p
C26
1
10u
C32
2
9p
C35, C50
1
6.8n
C36
1
120n
C37
1
100n
C39
2
0.01u
C45, C49
1
0.22u
C46
2
4.7k
R1, R2
2
550
R3, R26
2
1.5k
R5, R14
5
33
R6, R7, R9, R10, R11
8
10k
R8, R12, R13, R15, R16, R28, R29, R30
4
50
R17, R19, R20, R21
1
12.1k
R18
3
120
R22, R23, R35
7
750
R27, R36, R37, R38, R39, R40, R41
1
22.1k
R31
1
47.5k
R32
1
1k
R33
1
0
R34
1
680
R42

DataAcq-Sunlight design files

The KiCad project lives in the lhr-solar/DataAcq-SunlightPCB repository on GitHub; these links point at the commit this page was built from.

DataAcq-Sunlight: common questions

What microcontroller does the DataAcq-Sunlight use?

The DataAcq-Sunlight is built around the STM32F429ZITx, from the STM32 family.

How big is the DataAcq-Sunlight PCB?

The DataAcq-Sunlight measures 95 × 82 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DataAcq-Sunlight?

142 components, from 80 distinct parts. The full bill of materials is listed on this page.

Where can I download the DataAcq-Sunlight design files?

From the lhr-solar/DataAcq-SunlightPCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the DataAcq-Sunlight design in my own project?

The repository has no license, so all rights stay with lhr-solar. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the DataAcq-Sunlight without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards