13 open source boards using the LAN8742A-CZ-TR

Real designs built with the LAN8742A-CZ-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the LAN8742A-CZ-TR

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the LAN8742A-CZ-TR connects to, and the resistors, capacitors and other passives placed on it.

  • The RBIAS pin has a resistor to GND on 11 of 11 designs, most often 12.1 kΩ.
  • The VDD2A pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 10 nF).
  • The LED2/NINT/NPME/NINTSEL pin has a resistor to GND on 10 of 11 designs, most often 10 kΩ.
  • The VDDCR pin has a capacitor to GND on 10 of 11 designs, most often 470 pF (then 1 µF).
VDD2Apin 1Connected to: 3.3V 55% · a signal 45%
  • Decoupling capacitor on 91% · 100 nF (22), 10 nF (5), 10 µF (3)
LED2/NINT/NPME/NINTSELpin 2Connected to: A connector 82%
  • Resistor to GND on 91% · 10 kΩ (9)
LED1/NINT/NPME/REGOFFpin 3Connected to: A connector 82%
  • Resistor to GND on 64% · 10 kΩ (6)
XTAL2pin 4Connected to: Signal 82% · not connected 18%
  • Crystal on 73% · 25 MHz (3)
  • Capacitor to GND on 73% · 30 pF (5), 10 pF (1), 27 pF (1)
XTAL1/CLKINpin 5Connected to: Signal 100%
  • Crystal on 82% · 25 MHz (3)
  • Capacitor to GND on 82% · 30 pF (5), 10 pF (1), 27 pF (1)
  • Series resistor on 45% · 100 Ω (1)
VDDCRpin 6Connected to: Signal 91%
  • Capacitor to GND on 91% · 470 pF (8), 1 µF (8), 2.2 µF (1)
RXD1/MODE1pin 7Connected to: Signal 100%
  • Series resistor on 91% · 33 Ω (7)
  • Pull-up to 3.3V on 91% · 10 kΩ (9)
RXD0/MODE0pin 8Connected to: Signal 100%
  • Series resistor on 91% · 33 Ω (7)
  • Pull-up to 3.3V on 91% · 10 kΩ (9)
VDDIOpin 9Connected to: 3.3V 91%
  • Decoupling capacitor on 91% · 100 nF (8), 10 µF (4), 10 nF (1)
RXER/PHYAD0pin 10Connected to: Signal 91%
  • Resistor to GND on 91% · 10 kΩ (8), 12.1 kΩ (1)
CRS_DV/MODE2pin 11Connected to: Signal 100%
  • Series resistor on 91% · 33 Ω (7)
  • Pull-up to 3.3V on 91% · 10 kΩ (9)
MDIOpin 12Connected to: The microcontroller 73%
  • Pull-up to 3.3V on 91% · 1.5 kΩ (9)
  • Series resistor on 36% · 1.5 kΩ (1), 33 Ω (1)
NINT/REFCLKOpin 14Connected to: Signal 100%
  • Series resistor on 91% · 33 Ω (7), 10 kΩ (1)
  • Pull-up to 3.3V on 45% · 10 kΩ (3), 1.5 kΩ (1)
TXD0pin 17Connected to: The microcontroller 36%
  • Series resistor on 64% · 33 Ω (5)
TXD1pin 18Connected to: The microcontroller 36%
  • Series resistor on 64% · 33 Ω (5)
VDD1Apin 19Connected to: 3.3V 55% · a signal 45%
  • Decoupling capacitor on 91% · 100 nF (18), 10 nF (5), 100 µF (3)
  • Ferrite bead on 36% · 600 H (1)
TXNpin 20Connected to: A connector 82%, DT1140-04LP 27%
  • Series resistor on 45% · 49.9 Ω (4), 50 Ω (1)
  • Pull-up to 3.3V on 45% · 49.9 Ω (3), 50 Ω (1)
TXPpin 21Connected to: A connector 82%, DT1140-04LP 27%
  • Series resistor on 45% · 49.9 Ω (4), 50 Ω (1)
  • Pull-up to 3.3V on 45% · 49.9 Ω (3), 50 Ω (1)
RXNpin 22Connected to: A connector 82%, DT1140-04LP 27%
  • Series resistor on 45% · 49.9 Ω (4), 50 Ω (1)
  • Pull-up to 3.3V on 45% · 49.9 Ω (3), 50 Ω (1)
RXPpin 23Connected to: A connector 82%, DT1140-04LP 27%
  • Series resistor on 45% · 49.9 Ω (4), 50 Ω (1)
  • Pull-up to 3.3V on 45% · 49.9 Ω (3), 50 Ω (1)
RBIASpin 24Connected to: Signal 100%
  • Resistor to GND on 100% · 12.1 kΩ (10)
EPADpin 25Connected to: GND 100%

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Buddy board-MINI-PCB by prusa3d, Envox master MCU module by intergalaktik, Eez bb3plus cm5-mcu by eez-open and Buddy by bobc.

The LAN8742A-CZ-TR in open source designs

The gallery holds 13 open source boards using the LAN8742A-CZ-TR from 11 GitHub repositories; a typical one measures about 100 × 82 mm and carries around 266 components.

85% use four copper layers or more, and 46% carry an open source license.

The most starred is Buddy board-MINI-PCB by prusa3d.

Microcontrollers on boards using the LAN8742A-CZ-TR

LAN8742A-CZ-TR: common questions

Where can I find a LAN8742A-CZ-TR reference design?

Each of the 13 boards on this page is a real design using the LAN8742A-CZ-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the LAN8742A-CZ-TR RBIAS pin?

The RBIAS pin has a resistor to GND on 11 of 11 designs, most often 12.1 kΩ. Counted from the KiCad layouts of 11 open source designs using the LAN8742A-CZ-TR.

What decoupling capacitors do designs use on the LAN8742A-CZ-TR VDD2A pin?

The VDD2A pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 11 open source designs using the LAN8742A-CZ-TR.

What resistor goes on the LAN8742A-CZ-TR LED2/NINT/NPME/NINTSEL pin?

The LED2/NINT/NPME/NINTSEL pin has a resistor to GND on 10 of 11 designs, most often 10 kΩ. Counted from the KiCad layouts of 11 open source designs using the LAN8742A-CZ-TR.

What parts are used alongside the LAN8742A-CZ-TR?

The NCP1117-3.3_SOT223, AHCT125, DT1140-04LP, MCU-STM32F407VGT6(LQFP100) and ST25DV64K appear in the most repositories here.

Which microcontrollers do boards using the LAN8742A-CZ-TR use?

Most are built on STM32 (11) and RP2040/RP2350 (2).

How big is a typical board using the LAN8742A-CZ-TR?

The median is 100 × 82 mm, and 15% are two-layer designs.

What is the most popular open source board using the LAN8742A-CZ-TR?

By GitHub stars, Buddy board-MINI-PCB by prusa3d, with 64 stars.

Can I simulate one of these boards using the LAN8742A-CZ-TR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part