Ssd1332 breakout
About the Ssd1332 breakout
Ssd1332 breakout is an open source PCB design by libresmartphone, published on GitHub. It is a 2-layer board measuring 21 × 16.9 mm, with 15 components from 13 distinct parts.
Other key parts include the OMAP3530DCBB. By type, the board carries 5 capacitors, 5 resistors, 2 connectors, 1 IC, 1 diode and 1 inductor.
It belongs with the audio, displays & leds and dev boards & breakouts designs in this gallery.
From the project
This page contains the software used in the open hardware smartphone (libresmartphone)
This is gamma version. It's WIP and is going to be sent to production soon (as soon as last TODOs are finished). You can already order this board, but it's possible the I2C GPIO expander pin mapping is going to change. Also, before ordering, please make sure the Gerber files are recent (if they're up-to-date after latest commits concerning PCB files) and regenerate them if necessary.
Main components on the Ssd1332 breakout
Ssd1332 breakout bill of materials (BOM)
15 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OMAP3530DCBB MC34063 Texas Instruments Inc. | SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | CONN_01X07 | Pin_Header_Straight_1x07_Pitch2.54mm | P1 |
| 1 | CONN_01X27 | FPC_27 | P2 |
| 1 | ZHCS400TA 1N5819 Zetex | D_MiniMELF_Handsoldering | D1 |
| 1 | LPS3314-102ML 220uH Coilcraft | Choke_SMD_1206_Handsoldering | L1 |
| 1 | 470P | C_0805_HandSoldering | C1 |
| 3 | 4.7uF | C_0805_HandSoldering | C2, C3, C5 |
| 1 | 470 | C_0805_HandSoldering | C4 |
| 1 | 45K | R_0805_HandSoldering | R1 |
| 1 | 470 | R_0805_HandSoldering | R2 |
| 1 | 033 | R_0805_HandSoldering | R3 |
| 1 | 1.2K | R_0805_HandSoldering | R4 |
| 1 | 910K | R_0805_HandSoldering | R5 |
Ssd1332 breakout design files
The KiCad project lives in the libresmartphone/libresmartphone repository on GitHub; these links point at the commit this page was built from.
Ssd1332 breakout: common questions
How big is the Ssd1332 breakout?
The Ssd1332 breakout measures 21 × 16.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ssd1332 breakout?
15 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ssd1332 breakout design files?
From the libresmartphone/libresmartphone repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Ssd1332 breakout design in my own project?
The repository has no license, so all rights stay with libresmartphone. Use it as a reference, and ask the author before reusing the design.
More boards in libresmartphone
Woking
50 × 50 mm171 parts4LNo license33
Eth
50 × 50 mm99 parts4LNo license33
Mailbox
50 × 50 mm99 parts4LNo license33
Calculator.test
100.4 × 50 mm90 parts4LNo license33
ESP8266Front prototype
40 × 100 mm69 parts2LNo license33
.kicad
3 × 3 mm65 partsNo license33
AVR/ArduinoBack prototype
40 × 100 mm65 parts2LNo license33
Keypad prototype
40 × 60 mm30 parts2LNo license33
Ltc2990 sensor
12.7 × 13.5 mm13 parts2LNo license33
Zerophone audio buffer
13.2 × 10.7 mm5 parts2LNo license33
18650
40 × 88 mm3 parts2LNo license33
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k