HardLabs

RelayBoard

lindamao-waterloop·waterloop_electrical·RelayBoard/RelayBoard.kicad_pcb

RelayBoard PCB layout, top view — open source STM32 board by lindamao-waterloop

About the RelayBoard PCB

RelayBoard is an open source STM32 PCB design by lindamao-waterloop, published on GitHub. It is a 2-layer board measuring 52.8 × 38.1 mm, with 57 components from 24 distinct parts.

Its main chip is the STM32F745VEHx, from the STM32 family. Other key parts include the KSZ8863RLL, TJA1051T-3 and LF33_TO252. By type, the board carries 21 capacitors, 18 resistors, 10 connectors, 4 ICs, 2 inductors and 1 crystal.

From the project

Version control for the Waterloop Electrical Team

Main components on the RelayBoard

STM32F745VEHxKSZ8863RLLTJA1051T-3LF33_TO252

RelayBoard bill of materials (BOM)

57 components, 24 distinct parts.

QtyPartRefs
1
STM32F745VEHx
U1
1
KSZ8863RLL
U2
1
TJA1051T-3
U3
1
LF33_TO252
U4
1
ECS-2520SMV-250-GP-TR
X1
1
Micro_SD_Card
J1
1
Screw_Terminal_01x02
J2
1
Conn_01x04_Male
J3
4
505004-0812
J4, J10, J11, J12
2
SI-52008-F
J7, J8
1
Conn_01x04_Male
J13
1
Diode
D1
2
Ferrite_Bead_Small
FB1, FB2
5
22uF
C1, C4, C5, C6, C7
12
0.1uF
C2, C8, C9, C10, C11, C12, C13, C14 +4
3
10uF
C3, C19, C20
1
1000uF EEE-FT1A102AV
C22
1
10kΩ
R1
1
11.8kΩ, 1.0%
R2
8
49.9Ω, 1.0%
R3, R4, R5, R6, R7, R8, R9, R10
Show 4 more
QtyPartRefs
4
60Ω
R11, R12, R13, R14
1
300mΩ
R15
2
4.7kΩ
R16, R17
1
120Ω
R18

RelayBoard design files

The KiCad project lives in the lindamao-waterloop/waterloop_electrical repository on GitHub; these links point at the commit this page was built from.

RelayBoard: common questions

What microcontroller does the RelayBoard use?

The RelayBoard is built around the STM32F745VEHx, from the STM32 family.

How big is the RelayBoard PCB?

The RelayBoard measures 52.8 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RelayBoard?

57 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the RelayBoard design files?

From the lindamao-waterloop/waterloop_electrical repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the RelayBoard design in my own project?

The repository has no license, so all rights stay with lindamao-waterloop. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RelayBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in waterloop_electrical

Similar boards