Psyduck
About the Psyduck PCB
Psyduck is an open source AVR/Arduino PCB design by lindamao-waterloop, published on GitHub. It is a 2-layer board measuring 38.1 × 25.4 mm, with 15 components from 12 distinct parts.
Its main chip is the ATmega16M1-AU, from the AVR/Arduino family. Other key parts include the TJA1051T and NCP1117-5V. By type, the board carries 7 capacitors, 3 ICs, 3 connectors, 1 crystal and 1 resistor.
From the project
Version control for the Waterloop Electrical Team
Main components on the Psyduck
Psyduck bill of materials (BOM)
15 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega16M1-AU | TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | TJA1051T | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | NCP1117-5V | SOT-223-3_TabPin2 | U3 |
| 1 | Crystal | Crystal_SMD_MicroCrystal_CC8V-T1A-2Pin_2.0x1.2mm | Y1 |
| 1 | ISP-6 | PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04_Male | JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | Conn_01x03_Male | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J3 |
| 3 | 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C7, C9 |
| 1 | 100u | C_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C3 |
| 2 | 10p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C6 |
| 1 | 100p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8 |
| 1 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
Psyduck design files
The KiCad project lives in the lindamao-waterloop/waterloop_electrical repository on GitHub; these links point at the commit this page was built from.
Psyduck: common questions
What microcontroller does the Psyduck use?
The Psyduck is built around the ATmega16M1-AU, from the AVR/Arduino family.
How big is the Psyduck PCB?
The Psyduck measures 38.1 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Psyduck?
15 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Psyduck design files?
From the lindamao-waterloop/waterloop_electrical repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Psyduck design in my own project?
The repository has no license, so all rights stay with lindamao-waterloop. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Psyduck without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in waterloop_electrical
STM32RelayBoard
52.8 × 38.1 mm57 parts2LNo license2
AVR/ArduinoLaser Stripe Sensor
68.6 × 53.3 mm33 parts2LNo license2
AVR/ArduinoBrakeActuator
38.1 × 25.4 mm26 parts2LNo license2
AVR/ArduinoTorchic
42.2 × 25.4 mm21 parts2LNo license2
AVR/ArduinoOptical Ring Encoder
46.4 × 25.6 mm20 parts2LNo license2
AVR/ArduinoDelibird
38.1 × 25.4 mm18 parts2LNo license2
Raspberry PI
36.7 × 19.4 mm11 parts2LNo license2
CAN hub
45 × 20 mm8 parts2LNo license2
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k