HardLabs

Delibird

lindamao-waterloop·waterloop_electrical·Delibird/Delibird.kicad_pcb

Delibird PCB layout, top view — open source AVR/Arduino board by lindamao-waterloop

About the Delibird PCB

Delibird is an open source AVR/Arduino PCB design by lindamao-waterloop, published on GitHub. It is a 2-layer board measuring 38.1 × 25.4 mm, with 18 components from 13 distinct parts.

Its main chip is the ATmega16M1-AU, from the AVR/Arduino family. Other key parts include the TJA1051T, NCP1117-5V and NCP1117-3.3V. By type, the board carries 9 capacitors, 4 ICs, 2 connectors, 2 resistors and 1 crystal.

From the project

Version control for the Waterloop Electrical Team

Main components on the Delibird

ATmega16M1-AUTJA1051TNCP1117-5VNCP1117-3.3V

Delibird bill of materials (BOM)

18 components, 13 distinct parts.

QtyPartRefs
1
ATmega16M1-AU
U1
1
TJA1051T
U2
1
NCP1117-5V
U3
1
NCP1117-3.3V
U4
1
Crystal
Y1
1
ISP-6
J1
1
Conn_01x04_Male
J2
4
100n
C1, C2, C7, C9
2
100u
C3, C4
2
20p
C5, C6
1
100p
C8
1
10k
R1
1
120
R2

Delibird design files

The KiCad project lives in the lindamao-waterloop/waterloop_electrical repository on GitHub; these links point at the commit this page was built from.

Delibird: common questions

What microcontroller does the Delibird use?

The Delibird is built around the ATmega16M1-AU, from the AVR/Arduino family.

How big is the Delibird PCB?

The Delibird measures 38.1 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Delibird?

18 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Delibird design files?

From the lindamao-waterloop/waterloop_electrical repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Delibird design in my own project?

The repository has no license, so all rights stay with lindamao-waterloop. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Delibird without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in waterloop_electrical

Similar boards