QuoteUSB
Linkernel0x·QuoteUSB·hardware/QuoteUSB.kicad_pcb
About the QuoteUSB PCB
QuoteUSB is an open source WCH CH32/CH55x PCB design by Linkernel0x, published on GitHub. It is a 2-layer board measuring 49 × 21 mm, with 9 components from 6 distinct parts.
Its main chip is the CH552G, from the WCH CH32/CH55x family. By type, the board carries 3 switches, 2 capacitors, 1 IC, 1 connector, 1 diode and 1 resistor.
From the project
small usb gadget made for hackclub as a hardware experiment
A small 3-button USB MacroPad built for HackClub as a hardware experiment with the CH552G microcontroller
- Microcontroller: CH552G - Inputs: 3 switches (Quote Generator 1, Quote Generator 2, Macro button) - Status: Integrated LED indicator on keypress
For the full devlog and project history, check out JOURNAL.md.

Main components on the QuoteUSB
QuoteUSB bill of materials (BOM)
9 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH552G | SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | USB_A | USB_A_Molex_48037-2200_Horizontal | J1 |
| 3 | SW_Push | SW_SPST_PTS645Sx43SMTR92 | SW1, SW2, SW3 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 2 | 100NF 100nf | C_0805_2012Metric | C1, C2 |
| 1 | 330R | R_0805_2012Metric | R1 |
QuoteUSB design files
The KiCad project lives in the Linkernel0x/QuoteUSB repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/QuoteUSB.kicad_pcb
- Schematichardware/QuoteUSB.kicad_sch
- BOMhardware/BOM.csv
QuoteUSB: common questions
What microcontroller does the QuoteUSB use?
The QuoteUSB is built around the CH552G, from the WCH CH32/CH55x family.
How big is the QuoteUSB PCB?
The QuoteUSB measures 49 × 21 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the QuoteUSB?
9 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the QuoteUSB design files?
From the Linkernel0x/QuoteUSB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the QuoteUSB design in my own project?
The repository has no license, so all rights stay with Linkernel0x. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the QuoteUSB without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug WCH CH32/CH55x firmware against it before you order a PCB.
Similar boards
WCH CH32/CH55x
Ps2usb
rasteri
40 × 55 mm25 parts2LNo license428WCH CH32/CH55x
CH32X-48
rgoulter
224.6 × 74.2 mm112 parts2LNo license230WCH CH32/CH55x
CH32X-60-ANSI-Improved
rgoulter
285 × 94.2 mm149 parts2LNo license230WCH CH32/CH55x
CH32X-75
rgoulter
285 × 94.2 mm318 parts2LNo license230WCH CH32/CH55x
CH552-48
rgoulter
224.6 × 74.2 mm107 parts2LNo license230WCH CH32/CH55x
Webusb programmer rev6
laneboysrc
38 × 20 mm18 parts2LMIT87