5-Channel-High-Current-Li po-Discharger
Lnotti·5-Channel-High-Current-Li-po-Discharger·_restore_backup_2026-05-21T22-28-28-728/Lipo Discharger.kicad_pcb
About the 5-Channel-High-Current-Li po-Discharger PCB
5-Channel-High-Current-Li po-Discharger is an open source STM32 PCB design by Lnotti, published on GitHub. It is a 2-layer board measuring 160 × 110 mm, with 122 components from 42 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the MP2359DJ-LF-Z, AMS1117-3.3 and PCA9685BS. By type, the board carries 59 resistors, 23 capacitors, 18 diodes, 8 connectors, 6 transistors and 4 ICs.
It belongs with the power & battery designs in this gallery.
From the project
A PCB designed to discharge 6S LiHV battery packs to storage voltage (3.8V per cell / 22.8V total) across up to 5 independent channels simultaneously.
A PCB designed to discharge 6S LiHV battery packs to storage voltage (3.8V per cell / 22.8V total) across up to 5 independent channels simultaneously.
Leaving LiPo packs fully charged for extended periods degrades cell chemistry over time. This board solves that by providing a dedicated, controlled way to bring packs down to storage voltage after a flying session without needing a full featured charger to do it.
Main components on the 5-Channel-High-Current-Li po-Discharger
5-Channel-High-Current-Li po-Discharger bill of materials (BOM)
122 components, 42 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MP2359DJ-LF-Z | TSOT-23-6_HandSoldering | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | STM32F103C8T6 STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | PCA9685BS | TSSOP-28_4.4x9.7mm_P0.65mm | U4 |
| 5 | IRLZ44NPBF IRLZ44N | TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5 |
| 1 | 2N2222 | TO-92_Inline | Q6 |
| 1 | 8MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | SWD | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | XT60_P1 | AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J4 |
| 1 | XT60_P2 | AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J5 |
| 1 | XT60_P3 | AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J6 |
| 1 | XT60_P4 | AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J7 |
| 1 | XT60_P5 | AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J8 |
| 1 | FAN | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | Polyfuse | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | BOOT0_BTN | SW_PUSH_6mm | SW1 |
| 1 | SMBJ26A D_TVS | D_SMB_Handsoldering | D1 |
| 1 | SS34 | D_SMB_Handsoldering | D2 |
| 5 | SMBJ26A | D_SMB_Handsoldering | D3, D5, D7, D9, D11 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | LED_KRGB | LED_D5.0mm-4_RGB | D4, D6, D8, D10, D12 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D13 |
| 5 | SS34 | D_SMA | D14, D15, D16, D17, D18 |
| 1 | 22uH | L_Bourns_SRR1260 | L1 |
| 1 | 10uf 35V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 14 | 100NF 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C7, C8, C9, C10, C11, C12, C15 +6 |
| 2 | 22uF 10V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 10UF 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 1 | 1UF 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | 10NF 10nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14 |
| 2 | 20PF 20pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16, C17 |
| 11 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R8, R11, R14, R16, R20, R22, R26 +3 |
| 1 | 20k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 3 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R48 |
| 1 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 2 | 5.1K 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 5 | 15k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R15, R21, R27, R33 |
| 5 | 10R 10 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R17, R23, R29, R35 |
| 15 | 8.2R 10W | R_Axial_Power_L25.0mm_W9.0mm_P27.94mm | R12, R13, R18, R19, R24, R25, R30, R31 +7 |
| 5 | 68R 68 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R38, R41, R44, R47, R51 |
| 10 | 22R 22 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R39, R40, R42, R43, R45, R46, R49, R50 +2 |
| 1 | 100R 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R54 |
5-Channel-High-Current-Li po-Discharger design files
The KiCad project lives in the Lnotti/5-Channel-High-Current-Li-po-Discharger repository on GitHub; these links point at the commit this page was built from.
5-Channel-High-Current-Li po-Discharger: common questions
What microcontroller does the 5-Channel-High-Current-Li po-Discharger use?
The 5-Channel-High-Current-Li po-Discharger is built around the STM32F103C8T6, from the STM32 family.
How big is the 5-Channel-High-Current-Li po-Discharger PCB?
The 5-Channel-High-Current-Li po-Discharger measures 160 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 5-Channel-High-Current-Li po-Discharger?
122 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 5-Channel-High-Current-Li po-Discharger design files?
From the Lnotti/5-Channel-High-Current-Li-po-Discharger repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 5-Channel-High-Current-Li po-Discharger design in my own project?
The repository has no license, so all rights stay with Lnotti. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 5-Channel-High-Current-Li po-Discharger without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k