Custom keyboard playground
localcc·Custom_keyboard_playground
About the Custom keyboard playground PCB
Custom keyboard playground is an open source STM32 PCB design by localcc, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 72.3 × 41.7 mm, with 35 components from 23 distinct parts.
Its main chip is the STM32F103RBTx, from the STM32 family. Other key parts include the mp2359 and USBLC6-2SC6. By type, the board carries 8 capacitors, 6 diodes, 6 resistors, 4 connectors, 3 ICs and 1 crystal.
It belongs with the keyboards designs in this gallery.
From the project
A place where I fiddle around with custom keyboard firmware, board layouts etc.
Main components on the Custom keyboard playground
Custom keyboard playground bill of materials (BOM)
35 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | mp2359 | SOT-23-6 | U1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | STM32F103RBTx | LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | 16MHz | Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 2 | Conn_01x03 | PinHeader_1x03_P1.27mm_Vertical | J1, J2 |
| 1 | USB_B_Micro | USB_Micro-B_Molex_47346-0001 | J3 |
| 1 | Conn_01x05 | PinHeader_1x05_P1.27mm_Vertical | J4 |
| 1 | 500mA | Fuse_1206_3216Metric | F1 |
| 4 | MX-NoLED | MX-1U | MX1, MX2, MX3, MX4 |
| 1 | SW_Push | SKQG-1155865 | SW1 |
| 4 | D_Small | D_SOD-123 | D1, D2, D3, D4 |
| 1 | D_Schottky | D_SOD-123 | D5 |
| 1 | 1N4148 | D_SOD-123 | D6 |
| 1 | 47uH/1.66A | L_10.4x10.4_H4.8 | L1 |
| 2 | 12pF | C_0805_2012Metric | C1, C8 |
| 1 | 22uF 6.3V | C_0805_2012Metric | C2 |
| 1 | 22nF | C_0805_2012Metric | C3 |
| 4 | 0.1uF | C_0805_2012Metric | C4, C5, C6, C7 |
| 2 | 10k | R_0805_2012Metric | R0, R2 |
| 1 | 50kOhm | R_0805_2012Metric | R1 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 47 | R_0805_2012Metric | R3 |
| 1 | 100kOhm | R_0805_2012Metric | R4 |
| 1 | 16.2kOhm | R_0805_2012Metric | R5 |
Custom keyboard playground design files
The KiCad project lives in the localcc/Custom_keyboard_playground repository on GitHub; these links point at the commit this page was built from.
- Layout100_keyboard.kicad_pcb
Custom keyboard playground: common questions
What microcontroller does the Custom keyboard playground use?
The Custom keyboard playground is built around the STM32F103RBTx, from the STM32 family.
How big is the Custom keyboard playground PCB?
The Custom keyboard playground measures 72.3 × 41.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Custom keyboard playground?
35 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Custom keyboard playground design files?
From the localcc/Custom_keyboard_playground repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Custom keyboard playground design in my own project?
Yes, under the terms of its GPL-3.0 license, which localcc chose for the repository.
Can I test firmware for the Custom keyboard playground without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k