6 open source boards using the STM32F103RBTx
Real designs built with the STM32F103RBTx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
Tesla-Front-Drive-Unit
damienmaguire
190.5 × 176.6 mm196 parts4LNo license59STM32
XBT Autolauncher 3.0
cxs1529
310 × 100 mm216 parts2LNo license0STM32
Strojni posuv
HolTyc
227 × 80 mm121 parts2LNo license0STM32
Heizrelaissteuerung
robin7331
155.6 × 86 mm93 parts2LNo license0STM32
Custom keyboard playground
localcc
72.3 × 41.7 mm35 parts2LGPL-3.00STM32
DataProcessingUnit
RobertGawron
85 × 50 mm48 parts2LMIT6
How designs wire the STM32F103RBTx
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the STM32F103RBTx connects to, and the resistors, capacitors and other passives placed on it.
- The PD0 pin has a crystal on 5 of 6 designs, most often 8 MHz (then 16 MHz).
- The PD0 pin has a capacitor to GND on 5 of 6 designs, most often 20 pF (then 22 pF).
- The NRST pin has a capacitor to GND on 5 of 6 designs, most often 100 nF.
- The VDDA pin has a decoupling capacitor on 5 of 6 designs, most often 10 nF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 50% · not connected 33% · a signal 17% |
|
| PC15pin 4 | Connected to: Signal 67% · not connected 33% |
|
| PD0pin 5 | Connected to: Signal 100% |
|
| PD1pin 6 | Connected to: Signal 100% |
|
| NRSTpin 7 | Connected to: A connector 50% |
|
| PC0pin 8 | Connected to: Signal 67% · not connected 33% |
|
| PC1pin 9 | Connected to: Signal 67% · not connected 33% |
|
| PC3pin 11 | Connected to: Signal 67% · not connected 33% |
|
| VSSApin 12 | Connected to: GND 100% | — |
| VDDApin 13 | Connected to: 3.3V 83% · a signal 17% |
|
| VSSpin 18, 31, 47, 63 | Connected to: GND 100% | — |
| VDDpin 19, 32, 48, 64 | Connected to: 3.3V 100% |
|
| PB0pin 26 | Connected to: A connector 33% · not connected 17% |
|
| PB2pin 28 | Connected to: A connector 33% · not connected 33% |
|
| PB11pin 30 | Connected to: A connector 33% · not connected 17% |
|
| PB14pin 35 | Connected to: Signal 83% · not connected 17% |
|
| PB15pin 36 | Connected to: A connector 33% · not connected 17% |
|
| PC6pin 37 | Connected to: A connector 33% · not connected 17% |
|
| PC8pin 39 | Connected to: Signal 67% · not connected 33% |
|
| PC9pin 40 | Connected to: Not connected 50% · a signal 50% |
|
| PA11pin 44 | Connected to: Signal 83% · not connected 17% |
|
| PA12pin 45 | Connected to: Signal 83% · not connected 17% |
|
| PC11pin 52 | Connected to: A connector 33% · not connected 17% |
|
| PB3pin 55 | Connected to: A connector 50% |
|
| PB5pin 57 | Connected to: Signal 67% · not connected 33% |
|
| PB6pin 58 | Connected to: A connector 50% |
|
| PB7pin 59 | Connected to: A connector 33% · not connected 17% |
|
| BOOT0pin 60 | Connected to: Signal 100% |
|
| PB8pin 61 | Connected to: Not connected 50% · a signal 50% |
|
| PB9pin 62 | Connected to: Not connected 67% · a signal 33% | — |
28 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Tesla-Front-Drive-Unit by damienmaguire, DataProcessingUnit by RobertGawron, XBT Autolauncher 3.0 by cxs1529 and Strojni posuv by HolTyc.
The STM32F103RBTx in open source designs
The gallery holds 6 open source boards using the STM32F103RBTx from 6 GitHub repositories; a typical one measures about 173.1 × 83 mm and carries around 107 components.
83% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Tesla-Front-Drive-Unit by damienmaguire.
Parts used alongside the STM32F103RBTx
What boards using the STM32F103RBTx are built for
STM32F103RBTx: common questions
Where can I find a STM32F103RBTx reference design?
Each of the 6 boards on this page is a real design using the STM32F103RBTx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32F103RBTx PD0 pin connected?
The PD0 pin has a crystal on 5 of 6 designs, most often 8 MHz (then 16 MHz). Counted from the KiCad layouts of 6 open source designs using the STM32F103RBTx.
How is the STM32F103RBTx NRST pin connected?
The NRST pin has a capacitor to GND on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the STM32F103RBTx.
What decoupling capacitors do designs use on the STM32F103RBTx VDDA pin?
The VDDA pin has a decoupling capacitor on 5 of 6 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the STM32F103RBTx.
Which microcontrollers do boards using the STM32F103RBTx use?
Most are built on STM32 (5) and ESP8266 (1).
How big is a typical board using the STM32F103RBTx?
The median is 173.1 × 83 mm, and 83% are two-layer designs.
What is the most popular open source board using the STM32F103RBTx?
By GitHub stars, Tesla-Front-Drive-Unit by damienmaguire, with 59 stars.
Can I simulate one of these boards using the STM32F103RBTx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.