PCB-402 Base board
LollobolUni·muon-time-dilation·hardware/kicad/PCB-402_base_board/PCB-402_base_board.kicad_pcb
About the PCB-402 Base board
PCB-402 Base board is an open source RP2040/RP2350 PCB design by LollobolUni, published on GitHub. It is a 2-layer board measuring 100 × 64 mm, with 60 components from 32 distinct parts.
Its main chip is the KH-2.54FH-1X20P-H8.5, from the RP2040/RP2350 family. Other key parts include the TLV75533PDBVR and MAX5026EUT+T. By type, the board carries 27 resistors, 19 capacitors, 7 connectors, 3 ICs, 2 inductors and 1 diode.
From the project
A self-built experiment to measure the lifetime of cosmic-ray muons and to show, with data taken from cable cars in the Alps, that moving clocks run slow.
A self-built experiment to measure the lifetime of cosmic-ray muons and to show, with data taken from cable cars in the Alps, that moving clocks run slow.
Muons are created about 15 km above the ground and live on average 2.2 µs. Without special relativity almost none of them would reach the surface. The experiment has two parts:
1. Muon lifetime at rest. A one-litre plastic scintillator stops about a thousand muons a day. The time between the flash of the stopping muon and the flash of its decay electron gives the lifetime, with a target precision of 2–3%. 2. Muon flux versus altitude. Two…
Main components on the PCB-402 Base board
PCB-402 Base board bill of materials (BOM)
60 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | KH-2.54FH-1X20P-H8.5 Pico 2 Kinghelm | RaspberryPi_Pico2_Sockets | U1 |
| 1 | TLV75533PDBVR TPS7A2033PDBV Texas Instruments | SOT-23-5 | U2 |
| 1 | MAX5026EUT+T MAX5026EUT Analog Devices | SOT-23-6 | U3 |
| 1 | C131342 JST PH CH1 JST | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J1 |
| 1 | C131342 JST PH CH2 JST | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J2 |
| 1 | C131342 JST PH CH3 JST | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J3 |
| 1 | C131342 JST PH CH4 JST | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J4 |
| 1 | C2337 I2C BMP280 BOOMELE | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | C2337 SPI microSD BOOMELE | PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | C2337 UART BOOMELE | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | 3296W-1-202LF 2k Bourns | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | MBR0540T1G MBR0540 onsemi | D_SOD-123 | D1 |
| 1 | BLM21PG331SN1D 600R@100MHz Murata | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1 |
| 1 | SMNR6045-470MT 47uH SXN | L_Bourns_SRN6045TA | L1 |
| 1 | C2012X5R1E106KT000N 10u TDK | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 3 | CL21B104KBCNNNC 100n Samsung | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C8, C19 |
| 6 | CC0805KKX7R9BB105 1u YAGEO | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C9, C10, C11, C12, C13 |
| 3 | CL21A475KAQNNNE 4u7 Samsung | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C18 |
| 2 | CC0805KKX7R9BB105 1u 50V YAGEO | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7 |
| 4 | CL21B104KBCNNNC 100n 50V Samsung | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C15, C16, C17 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100R 1W | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R1 |
| 1 | RC0805FR-07147KL 147k YAGEO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | AC0805FR-076K81L 6k81 YAGEO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | RC0805FR-07100RL 100R YAGEO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 2 | RC0805FR-07100KL 100k YAGEO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R7 |
| 1 | RC0805FR-071ML 1M YAGEO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 5 | RC0805FR-0710KL 10k YAGEO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R14, R15, R16, R17 |
| 4 | RC0805FR-0720KL 20k YAGEO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R12, R13 |
| 4 | RC0805FR-071RL 1R YAGEO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R19, R20, R21 |
| 4 | RC1206FR-071KL 1k YAGEO | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R22, R23, R24, R25 |
| 2 | RC0805FR-074K7L 4k7 YAGEO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26, R27 |
PCB-402 Base board design files
The KiCad project lives in the LollobolUni/muon-time-dilation repository on GitHub; these links point at the commit this page was built from.
PCB-402 Base board: common questions
What microcontroller does the PCB-402 Base board use?
The PCB-402 Base board is built around the KH-2.54FH-1X20P-H8.5, from the RP2040/RP2350 family.
How big is the PCB-402 Base board?
The PCB-402 Base board measures 100 × 64 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB-402 Base board?
60 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PCB-402 Base board design files?
From the LollobolUni/muon-time-dilation repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PCB-402 Base board design in my own project?
The repository has no license, so all rights stay with LollobolUni. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PCB-402 Base board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in muon-time-dilation
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k