Rigel a hw
Longhorn-Rocketry-Electronics·Rigel·rigel-a-rx/rigel-a-hw/rigel-a-hw.kicad_pcb
About the Rigel a hw PCB
Rigel a hw is an open source PCB design by Longhorn-Rocketry-Electronics, published on GitHub. It is a 4-layer board measuring 35 × 20 mm, with 36 components from 19 distinct parts.
Other key parts include the XC6206P332MR, CH340X, C2765186, X1G004131004200 and KH-SMA-K513-G. By type, the board carries 22 capacitors, 6 resistors, 5 ICs, 2 LEDs and 1 inductor.
Main components on the Rigel a hw
Rigel a hw bill of materials (BOM)
36 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC6206P332MR | SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | U2 |
| 1 | CH340X | MSOP-10_L3.0-W3.0-P0.50-LS5.0-BL | U3 |
| 1 | C2765186 TYPE-C_16PIN_2MD(073) | USB-C-SMD_TYPE-C-6PIN-2MD-073 | U4 |
| 1 | X1G004131004200 | OSC-SMD_4P-L2.0-W1.6-BL_EPSON_TG-5006CJ-19H | U5 |
| 1 | KH-SMA-K513-G | ANT-TH_KH-SMA-K513-G | U6 |
| 2 | C2297 0805G_(Green) | LED0805-R-RD | LED1, LED2 |
| 1 | GZ2012D601TF | L0805 | L1 |
| 1 | 0.47UF 0.47uF | C_0603_1608Metric | C1 |
| 1 | 33PF 33pF | C_0402_1005Metric | C2 |
| 11 | 100NF 100nF | C_0402_1005Metric | C3, C4, C5, C6, C7, C8, C10, C11 +3 |
| 2 | 4.7UF 4.7uF | C_0603_1608Metric | C9, C16 |
| 2 | 1UF 1uF | C_0603_1608Metric | C14, C15 |
| 1 | 10NF 10nF | C_0402_1005Metric | C17 |
| 1 | 10PF 10pF | C_0402_1005Metric | C18 |
| 3 | 68PF 68pF | C_0402_1005Metric | C20, C21, C22 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R1, R2 |
| 1 | 4.7K 4.7k | R_0402_1005Metric | R3 |
| 1 | 220 | R_0402_1005Metric | R4 |
| 2 | 68 | R_0603_1608Metric | R5, R6 |
Rigel a hw design files
The KiCad project lives in the Longhorn-Rocketry-Electronics/Rigel repository on GitHub; these links point at the commit this page was built from.
Rigel a hw: common questions
How big is the Rigel a hw PCB?
The Rigel a hw measures 35 × 20 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Rigel a hw?
36 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rigel a hw design files?
From the Longhorn-Rocketry-Electronics/Rigel repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rigel a hw design in my own project?
The repository has no license, so all rights stay with Longhorn-Rocketry-Electronics. Use it as a reference, and ask the author before reusing the design.