4 open source boards using the C2765186
Real designs built with the C2765186, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
LIA
JGAguado
79 × 30 mm66 parts2LCC-BY-NC-4.015RP2040/RP2350
Vm1-controller
PeteHaughie
220 × 100 mm115 parts4LMIT1STM32
Rigel b hw
Longhorn-Rocketry-Electronics
233.5 × 45.5 mm56 parts4LNo license0Rigel a hw
Longhorn-Rocketry-Electronics
35 × 20 mm36 parts4LNo license0
The C2765186 in open source designs
The gallery holds 4 open source boards using the C2765186 from 3 GitHub repositories; a typical one measures about 149.5 × 37.8 mm and carries around 61 components.
75% use four copper layers or more, and 25% carry an open source license.
The most starred is LIA by JGAguado.
Parts used alongside the C2765186
Microcontrollers on boards using the C2765186
What boards using the C2765186 are built for
C2765186: common questions
Where can I find a C2765186 reference design?
Each of the 4 boards on this page is a real design using the C2765186. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the C2765186 use?
Most are built on ESP32 (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the C2765186?
The median is 149.5 × 37.8 mm, and 25% are two-layer designs.
What is the most popular open source board using the C2765186?
By GitHub stars, LIA by JGAguado, with 15 stars.
Can I simulate one of these boards using the C2765186 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.