MachineJDG2025 MEGA2560 Shield v2
About the MachineJDG2025 MEGA2560 Shield v2
MachineJDG2025 MEGA2560 Shield v2 is an open source PCB design by losientowilson67, published on GitHub. It is a 2-layer board measuring 75 × 90 mm, with 71 components from 47 distinct parts.
Other key parts include the Mega 2560 PRO Embed, LM22678TJ-5.0/NOPB and TPS54202HDDCR (TPS54202DDCR accepte). By type, the board carries 26 resistors, 18 capacitors, 10 connectors, 4 switches, 4 diodes and 3 ICs.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the MachineJDG2025 MEGA2560 Shield v2
MachineJDG2025 MEGA2560 Shield v2 bill of materials (BOM)
71 components, 47 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RobotDyn Mega 2560 PRO Embed CH340G + embases femelles 2x21, 2x16, 2x3 Mega 2560 PRO Embed | MODULE_MEGA_PRO_EMBED_CH340G_ATMEGA2560 | U1 |
| 1 | LM22678TJ-5.0/NOPB LM22678TJ-5.0 | TO-263-7_TabPin8 | U2 |
| 1 | TPS54202HDDCR (TPS54202DDCR accepte) TPS54202H | SOT-23-6 | U3 |
| 1 | MMBT3904 | SOT-23 | Q1 |
| 1 | BATT 12V | 691214110002 | J1 |
| 1 | MOT1 PWR | 691214110002 | J2 |
| 1 | MOT1 PWM/DIR | 691214110002 | J3 |
| 1 | MOT3 PWR | 691214110002 | J4 |
| 1 | MOT3 PWM/DIR | 691214110002 | J5 |
| 1 | SBUS | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | MOT4 PWR | 691214110002 | J8 |
| 1 | MOT4 DIR/PWM | 691214110002 | J9 |
| 1 | MOT2 PWR | 691214110002 | J10 |
| 1 | MOT2 DIR/PWM | 691214110002 | J11 |
| 1 | Keystone 3568 + fusible mini-lame 10A Fusible mini-lame 10A | Fuseholder_Blade_Mini_Keystone_3568 | F1 |
| 1 | SERVO1 | PinHeader_1x03_P2.54mm_Vertical | S1 |
| 1 | SERVO2 | PinHeader_1x03_P2.54mm_Vertical | S2 |
| 1 | SERVO3 | PinHeader_1x03_P2.54mm_Vertical | S3 |
| 1 | SERVO4 | PinHeader_1x03_P2.54mm_Vertical | S4 |
| 1 | LED verte 6V | LED_0805_2012Metric | LED1 |
Show 27 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED verte 5V | LED_0805_2012Metric | LED2 |
| 1 | SMCJ15A (TVS 1500W unidirectionnelle 15V) SMCJ15A | D_SMC | D1 |
| 1 | SS54 (Schottky 5A 40V) - protection inversion SS54 | D_SMC | D2 |
| 1 | Nexperia PMEG4050EP (Schottky 5A 40V, SOD-128) PMEG4050EP | D_SOD-128 | D3 |
| 1 | SS34 (anti-retour USB) SS34 | D_SMA | D4 |
| 1 | Bourns SRP1038C-4R7M (4.7uH, Isat >= 8A) 4.7uH | L_Bourns_SRP1038C_10.0x10.0mm | L1 |
| 1 | Bourns SRN6045TA-150M 15uH | L_Bourns_SRN6045TA | L2 |
| 1 | Electrolytique alu CMS 220uF 35V 8x10.5 220uF 35V | CP_Elec_8x10.5 | C1 |
| 6 | C49678 100nF 50V | C_0805_2012Metric | C2, C5, C11, C12, C17, C18 |
| 3 | 10uF 50V | C_1210_3225Metric | C3, C4, C10 |
| 1 | 10nF 50V | C_0805_2012Metric | C6 |
| 2 | 22uF 25V | C_1210_3225Metric | C7, C8 |
| 1 | Electrolytique alu CMS 220uF 16V 6.3x7.7 220uF 16V | CP_Elec_6.3x7.7 | C9 |
| 1 | 75PF 75pF | C_0805_2012Metric | C13 |
| 2 | 22uF 16V | C_1206_3216Metric | C14, C15 |
| 1 | 10uF 16V | C_1206_3216Metric | C16 |
| 3 | 1k | R_0805_2012Metric | R1, R7, R12 |
| 1 | 10K 10k | R_0805_2012Metric | R2 |
| 2 | 100K 100k | R_0805_2012Metric | R3, R8 |
| 2 | 33K 33k | R_0805_2012Metric | R4, R9 |
| 1 | 182R 1% | R_0805_2012Metric | R5 |
| 1 | C17513 1k 1% | R_0805_2012Metric | R6 |
| 1 | C17407 100k 1% | R_0805_2012Metric | R10 |
| 1 | 12.7k 1% | R_0805_2012Metric | R11 |
| 1 | 30k 1% | R_0805_2012Metric | R13 |
| 1 | C17414 10k 1% | R_0805_2012Metric | R14 |
| 12 | 100R | R_0805_2012Metric | R20, R21, R22, R23, R24, R25, R26, R27 +4 |
MachineJDG2025 MEGA2560 Shield v2 design files
The KiCad project lives in the losientowilson67/PCBRooting repository on GitHub; these links point at the commit this page was built from.
- LayoutShield Arduino Mega 2025 v2/MachineJDG2025_MEGA2560_Shield_v2/MachineJDG2025_MEGA2560_Shield_v2.kicad_pcb
- SchematicShield Arduino Mega 2025 v2/MachineJDG2025_MEGA2560_Shield_v2/MachineJDG2025_MEGA2560_Shield_v2.kicad_sch
- BOMShield Arduino Mega 2025 v2/MachineJDG2025_MEGA2560_Shield_v2/fabrication/BOM_complet.csv
MachineJDG2025 MEGA2560 Shield v2: common questions
How big is the MachineJDG2025 MEGA2560 Shield v2?
The MachineJDG2025 MEGA2560 Shield v2 measures 75 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MachineJDG2025 MEGA2560 Shield v2?
71 components, from 47 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MachineJDG2025 MEGA2560 Shield v2 design files?
From the losientowilson67/PCBRooting repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MachineJDG2025 MEGA2560 Shield v2 design in my own project?
The repository has no license, so all rights stay with losientowilson67. Use it as a reference, and ask the author before reusing the design.
More boards in PCBRooting
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979