6 open source boards using the LM22678TJ-5.0/NOPB

Real designs built with the LM22678TJ-5.0/NOPB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The LM22678TJ-5.0/NOPB in open source designs

The gallery holds 6 open source boards using the LM22678TJ-5.0/NOPB from 3 GitHub repositories; a typical one measures about 86.6 × 89.5 mm and carries around 75 components.

67% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.

The most starred is MainPCB by HelloAlex4.

Parts used alongside the LM22678TJ-5.0/NOPB

Microcontrollers on boards using the LM22678TJ-5.0/NOPB

What boards using the LM22678TJ-5.0/NOPB are built for

LM22678TJ-5.0/NOPB: common questions

Where can I find a LM22678TJ-5.0/NOPB reference design?

Each of the 6 boards on this page is a real design using the LM22678TJ-5.0/NOPB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the LM22678TJ-5.0/NOPB use?

Most are built on STM32 (1).

How big is a typical board using the LM22678TJ-5.0/NOPB?

The median is 86.6 × 89.5 mm, and 67% are two-layer designs.

What is the most popular open source board using the LM22678TJ-5.0/NOPB?

By GitHub stars, MainPCB by HelloAlex4, with 10 stars.

Can I simulate one of these boards using the LM22678TJ-5.0/NOPB before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part