Lrima ground.kicad-6inchs
LRIMa-Qc·iot_obj-sicro-sensor·schematic/lrima-ground/lrima-ground.kicad-6inchs_pcb.kicad_pcb
About the Lrima ground.kicad-6inchs PCB
Lrima ground.kicad-6inchs is an open source PCB design by LRIMa-Qc, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 31.2 × 163.1 mm, with 8 components from 7 distinct parts.
By type, the board carries 4 resistors, 2 capacitors, 1 connector and 1 diode.
It belongs with the sensors and iot & wireless designs in this gallery.
From the project
All in one smart IoT greenhouse monitoring and managing system
Authors : LRIMa (Laboratoire de Recherche Informatique de Maisonneuve)
The schematics and PCB were designed using KiCad EDA software There is a protective layer that needs to be applied on the ground part of the pcb to prevent corrosion
- VS Code - nRF Connect - nRF Connect VS Code extension - nRF toolchain v3.2.4 - nRF SDK v3.2.4 - J-Link - Python 3.8+ (for central application)

Lrima ground.kicad-6inchs bill of materials (BOM)
8 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Finger Join | Edge_Finger_5P | J1 |
| 1 | LL4148 JUXING(钜兴) | D_MiniMELF | D1 |
| 1 | 10nF YAGEO(国巨) | C_0603_1608Metric | C1 |
| 1 | 1nF YAGEO(国巨) | C_0603_1608Metric | C6 |
| 1 | NCP15XH103F03RC muRata(村田) | R_0402_1005Metric | R11 |
| 2 | 10kΩ UNI-ROYAL(厚声) | R_0603_1608Metric | R12, R14 |
| 1 | 1MΩ UNI-ROYAL(厚声) | R_0603_1608Metric | R13 |
Lrima ground.kicad-6inchs design files
The KiCad project lives in the LRIMa-Qc/iot_obj-sicro-sensor repository on GitHub; these links point at the commit this page was built from.
Lrima ground.kicad-6inchs: common questions
How big is the Lrima ground.kicad-6inchs PCB?
The Lrima ground.kicad-6inchs measures 31.2 × 163.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lrima ground.kicad-6inchs?
8 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lrima ground.kicad-6inchs design files?
From the LRIMa-Qc/iot_obj-sicro-sensor repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Lrima ground.kicad-6inchs design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which LRIMa-Qc chose for the repository.
More boards in iot_obj-sicro-sensor
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k