LRIMa Main
LRIMa-Qc·iot_obj-sicro-sensor·schematic/lrima-main/lrima-main.kicad_pcb
About the LRIMa Main PCB
LRIMa Main is an open source PCB design by LRIMa-Qc, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 33.5 × 78.3 mm, with 31 components from 24 distinct parts.
Other key parts include the STCC4-D-R3, TLC555CD, NRF_RST, ER10BGFBK and 5-146277-5. By type, the board carries 9 capacitors, 7 resistors, 6 ICs, 2 battery holders, 2 switches and 2 LEDs.
It belongs with the sensors and iot & wireless designs in this gallery.
From the project
All in one smart IoT greenhouse monitoring and managing system
Authors : LRIMa (Laboratoire de Recherche Informatique de Maisonneuve)
The schematics and PCB were designed using KiCad EDA software There is a protective layer that needs to be applied on the ground part of the pcb to prevent corrosion
- VS Code - nRF Connect - nRF Connect VS Code extension - nRF toolchain v3.2.4 - nRF SDK v3.2.4 - J-Link - Python 3.8+ (for central application)

Main components on the LRIMa Main
LRIMa Main bill of materials (BOM)
31 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STCC4-D-R3 | STCC4DR3 | IC1 |
| 1 | TLC555CD | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | NRF_RST | SMD-43_L18.0-W13.0-P1.27-E73-2G4M08S1E | U2 |
| 1 | ER10BGFBK | CONN-TH_10P-P2.54_WINGTAT_ER10BGFBK | U3 |
| 1 | 5-146277-5 | PinHeader_1x05_P2.54mm_Vertical | U4 |
| 1 | SHT4x | SHT4X | U5 |
| 1 | 32.768kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 2.54-1*3P母 | PinHeader_1x03_P2.54mm_Horizontal | P1 |
| 2 | BS-24-A1AJ008 | BAT-TH_BS-24-A1AJ013 | BT1, BT2 |
| 1 | MSK12C02 | SW_SPDT_PCM12 | SW3 |
| 1 | TS-1101-C-W | SW-SMD_L6.0-W3.3-LS8.0 | SW4 |
| 2 | NCD0603R1 | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED1, LED2 |
| 1 | 10uH | L_0603_1608Metric | L1 |
| 1 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 10nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 470pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 3 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5, C8 |
| 1 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 2 | 12p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C11 |
| 1 | 10kΩ | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 330Ω | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 1.6kΩ | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 2 | 470Ω | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
LRIMa Main design files
The KiCad project lives in the LRIMa-Qc/iot_obj-sicro-sensor repository on GitHub; these links point at the commit this page was built from.
LRIMa Main: common questions
How big is the LRIMa Main PCB?
The LRIMa Main measures 33.5 × 78.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LRIMa Main?
31 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the LRIMa Main design files?
From the LRIMa-Qc/iot_obj-sicro-sensor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LRIMa Main design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which LRIMa-Qc chose for the repository.
More boards in iot_obj-sicro-sensor
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k